Dec 312017
Patch for registered version of Telix for Windows. Patches any previous version of TFW to v1.01a.

Full Description of File

Patch file for REGISTERED versions of Telix
for Windows. This patch file upgrades all of
the existing registered versions of Telix for
Windows to version 1.01, released Oct 14, 94.
This patch is free and is direct from the
author. It will not work on unregistered

File TFW101RP.ZIP from The Programmer’s Corner in
Category Communications
Patch for registered version of Telix for Windows. Patches any previous version of TFW to v1.01a.
File Name File Size Zip Size Zip Type
FILE_ID.DIZ 279 185 deflated
KBDFILES.ZIP 9624 9339 deflated
PATCH.EXE 45450 43691 deflated
PATCH.RTP 297356 288600 deflated
PATCH.TXT 5191 1920 deflated
WHATSNEW.WRI 5760 2556 deflated
WINHOST.ZIP 30057 28116 deflated

Download File TFW101RP.ZIP Here

Contents of the PATCH.TXT file

deltaComm Development, Inc., PO Box 1185, Cary, NC 27512 USA

(919)-460-4556 voice, (919)-460-4531 FAX, (919)-481-9399 BBS

Telix Copyright (C) 1986-1994 by deltaComm Development, Inc.

October 14th, 1994 --

In line with new deltaComm policy, minor updates, such as those from
Telix for Windows 1.00a to Telix for Windows 1.01a, will no longer be
charged for. This patch file has been released to take your registered
copy of Telix for Windows and convert it to a registered v1.01a.

Version 1.00a (size: 1,744,896) was released on August 1st, 1994.
Version 1.00b (size: 1,740,032) was released on September 14th, 1994.
Version 1.01a (size: 1,733,888) is dated October 14th, 1994.

To apply this patch, please follow the directions below precisely:

1) Place the files PATCH.EXE and PATCH.RTP in the same directory that
you keep TELIX.EXE and APROW.DLL in. Exit Windows. This patch
program MUST be run when Windows is not loaded.

2) Run the PATCH.EXE program. Your screen will look somewhat like the
following, but may differ depending on the revision of Telix you
are patching (the patch program may patch more files than are
shown in this example) :

PATCH Version 2.01 - .RTPatch(R) Software Update System
(C) Copyright Pocket Soft, Inc., 1991-1994. All Rights Reserved.
< Pocket Soft, Inc. (713) 460-5600 >

Processing Patch File

Applying UPDATE File Patch for 'TELIX.EXE'

Updating ...
File successfully Updated!
Deleting Old File

Applying UPDATE File Patch for 'APROWP.DLL'

Updating ...
File successfully Updated!
Deleting Old File

Patch File Processing Complete

3) The resultant copy of TELIX.EXE will be the latest release, and
may be immediately used.

4) Some sections of Telix for Windows may have had user modifications
made to them, notably the Host Mode and the Keyboard Definition
files. Because we did not want to overwrite any modifications
you might have made, the patch program will NOT automatically
update these files, though they HAVE been corrected in some cases.

A complete set of *.KBD keyboard macros and terminal emulation
keyboard sequences can be found in the included file KBDFILES.ZIP.

A newer, updated host mode that more closely resembles the
documentation may be found in the included file WINHOST.ZIP.


Q: I get the following error message when applying the patch:

error ept0036: Original file not found. However, a file of the
same name was found. No update done since file
checksums do not match.

A: PATCH was unable to locate an exact match for the original file
to be updated. It is likely that you are trying to apply this
patch to a version OTHER than the registered v1.00a, which is
exactly 1,744,896 bytes. If you think you may be patching the
wrong file, or if you are certain that you are patching the right
file, please contact Technical Support at (919) 460-4556 if this
message persists.

This message may also be caused by another situation: A TSR could
be interfering with your system and its ability to read the
original file from disk.

Programs known to cause PATCH.EXE to generate this error are
Stacker and DoubleSpace, some disk caches, some CD-ROM drivers,
and some anti-viral software. Anything loaded in your CONFIG.SYS
and AUTOEXEC.BAT can potentially cause this error. Each can cause
the checksum of the file you have to differ from the checksum of
the file we used to build the patch.

Please try to remove these items from memory if PATCH gives you
this error, and then start over at step 2. The best way to do
this is to boot from a bootable floppy drive that has NO

If all the above steps fail, please upload your TELIX.EXE file
to deltaComm Online at 919-481-9399 and we will look into the
possibility of adding support to the patch for your revision.


 December 31, 2017  Add comments

 Leave a Reply

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>