Category : Communication (modem) tools and utilities
Archive : CU-200.ZIP
Filename : MODEMS.CDF
Output of file : MODEMS.CDF contained in archive : CU-200.ZIP
; C O M M U N I Q U
;
; ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
; Quick Modem Setup Utility Datafile
; ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
;
; Date: 3rd July 1993
;
; "MODEM
; "SPEED
; "INIT
; "PREFIX
; "SUFFIX
; "CANCEL
; "RINGSTR[1]
; "RINGSTR[2]
; "RINGSTR[3]
; "RINGSTR[4]
; "HANGUP
; "ANSWER
; "TOGGLE DTR " Turns TOGGLE DTR on in Communiqu
; "DTR
; "BREAK
; "HFLOW " Turns HARDWARE FLOW CONTROL on in Communiqu
; "SFLOW " Turns SOFTWARE FLOW CONTROL on in Communiqu
;
; "SWTICH
; "NOTE
; "SETUP
;
;
; NOTES: o Any settings not entered in the modem definition will be given
; Communiqu's default generic modem settings.
; o These commands may be in any order.
;
;
--------------------------------------------------------------------------------
MODEM Anchor 2400i internal half-card
SPEED 2400
INIT ATZ|
PREFIX ATDT
SUFFIX |
CANCEL |
HANGUP ATS0=0H0|
ANSWER ATA|
BREAK 200
DTR 500
TOGGLE DTR
NOTE Your 2400 baud modem is ready to go!
--------------------------------------------------------------------------------
MODEM AST 2X9600
SPEED 19200
INIT ATZ|
PREFIX ATDT
SUFFIX |
CANCEL |
ANSWER ATA|
TOGGLE DTR
SWITCH Switch Settings: FRONT 1 2 3 4 5 6 7 8 9 10
SWITCH U D D U D U U D X X
SWITCH REAR 1 2 3 4 5 6 7 8
SWITCH D D D U D U U X
SWITCH X = Not Used
--------------------------------------------------------------------------------
MODEM ATI 2400etc
SPEED 9600
INIT ATZ|
PREFIX ATDT
SUFFIX |
CANCEL |
ANSWER ATA|
--------------------------------------------------------------------------------
MODEM ATI 2400etc/e & 2400etc/i V.42
SPEED 9600
INIT ATZ|
PREFIX ATDT
SUFFIX |
CANCEL |
ANSWER ATA|
--------------------------------------------------------------------------------
MODEM ATI 9600etc/e V.32/V.42
SPEED 38400
INIT ATZ|
PREFIX ATDT
SUFFIX |
CANCEL |
ANSWER ATA|
DTR 500
--------------------------------------------------------------------------------
MODEM Cardinal 2400 MNP
SPEED 9600
INIT ATZ|
PREFIX ATDT
SUFFIX |
CANCEL |
HANGUP ATS0=0H0|
ANSWER ATA|
TOGGLE DTR
HFLOW
BREAK 500
--------------------------------------------------------------------------------
MODEM CompuCom Speedmodem
SPEED 19200
INIT AT&F2%H2&D2S10=30%C0H0
PREFIX ATDT
SUFFIX |
CANCEL |
HANGUP ATS0=0H0|
ANSWER ATA|
TOGGLE DTR
HFLOW
BREAK 500
--------------------------------------------------------------------------------
MODEM Digicom 9624LE / 9624PC V.32bis
SPEED 38400
INIT ATZ|
PREFIX ATDT
SUFFIX |
CANCEL |
HANGUP ATS0=0H0|
ANSWER ATA|
TOGGLE DTR
HFLOW
BREAK 500
--------------------------------------------------------------------------------
MODEM Digitan HiNOTE IQ ZX1896 2400 Fax Modem
SPEED 2400
INIT ATE1Q0V1X4&C1&D2S7=60S25=4|
PREFIX ATDT
SUFFIX |
CANCEL |
HANGUP ATS0=0H0|
ANSWER ATA|
TOGGLE DTR
SFLOW
BREAK 500
--------------------------------------------------------------------------------
MODEM E* Tech Bullet E9696M V.32 MNP
SPEED 19200
INIT ATZ|
PREFIX ATDT
SUFFIX |
CANCEL |
HANGUP ATS0=0H0|
ANSWER ATA|
TOGGLE DTR
HFLOW
BREAK 500
--------------------------------------------------------------------------------
MODEM E* Tech Bullet PC2400MH MNP
SPEED 9600
INIT ATZ|
PREFIX ATDT
SUFFIX |
CANCEL |
HANGUP ATS0=0H0|
ANSWER ATA|
TOGGLE DTR
HFLOW
BREAK 500
--------------------------------------------------------------------------------
MODEM Everex 12e External (EV-936)
SPEED 1200
INIT ATE1F1H0M1Q0V1X4&C1&D2|
PREFIX ATDT
SUFFIX |
CANCEL |
HANGUP ATS0=0H0|
ANSWER ATA|
TOGGLE DTR
SFLOW
BREAK 1000
SWITCH Switch Settings: 1 2 3 4 5 6 7 8 9
SWITCH On Off Off Off Off On Off Off Off
--------------------------------------------------------------------------------
MODEM Everex 24e External (EV-945)
SPEED 2400
INIT ATE1F1H0M1Q0V1X4&C1&D2|
PREFIX ATDT
SUFFIX |
CANCEL |
HANGUP ATS0=0H0|
ANSWER ATA|
TOGGLE DTR
SFLOW
BREAK 1000
SWITCH Switch Settings: 1 2 3 4 5 6 7 8 9
SWITCH On Off Off Off Off On Off Off Off
--------------------------------------------------------------------------------
MODEM Everex Evercom 24+ MNP
SPEED 9600
INIT AT\C0\J0\K5\N3\Q0\V1V1E1Q0X4|
PREFIX ATDT
SUFFIX |
CANCEL |
HANGUP ATS0=0H0|
ANSWER ATA|
HFLOW
BREAK 1000
--------------------------------------------------------------------------------
MODEM Everex EverFax 24/96
SPEED 9600
INIT ATZ|
PREFIX ATDT
SUFFIX |
CANCEL |
HANGUP ATS0=0H0|
ANSWER ATA|
TOGGLE DTR
HFLOW
BREAK 1000
NOTE Your Everex EverFax 24/96 is ready to go! Be sure to read your
NOTE modem manual and double-check the setup.
--------------------------------------------------------------------------------
MODEM Fastcomm FDX 2424 (MNP Class-5)
SPEED 9600
INIT ATZ|
PREFIX ATDT
SUFFIX |
CANCEL |
HANGUP ATS0=0H0|
ANSWER ATA|
TOGGLE DTR
HFLOW
BREAK 500
SWITCH All switches on the bottom of the modem should be in the
SWITCH OPEN (off) position.
--------------------------------------------------------------------------------
MODEM Fastcomm FDX 2496
SPEED 9600
INIT ATZ|
PREFIX ATDT
SUFFIX |
CANCEL |
HANGUP ATS0=0H0|
ANSWER ATA|
TOGGLE DTR
HFLOW
BREAK 500
SWITCH All switches on the bottom of the modem should be in the
SWTICH OPEN (off) position.
--------------------------------------------------------------------------------
MODEM Fastcomm FDX 9696 (V.32 & MNP-5)
SPEED 19200
INIT ATZ|
PREFIX ATDT
SUFFIX |
CANCEL |
HANGUP ATS0=0H0|
ANSWER ATA|
TOGGLE DTR
HFLOW
BREAK 500
SWTICH All switches on the bottom of the modem should be in the
SWITCH OPEN (off) position.
--------------------------------------------------------------------------------
MODEM Forval IM14400/SA14400 V.32bis (38400 baud)
SPEED 38400
INIT ATZ0|
PREFIX ATDT
SUFFIX |
CANCEL |
HANGUP ATS0=0H0|
ANSWER ATA|
TOGGLE DTR
HFLOW
BREAK 500
--------------------------------------------------------------------------------
MODEM Forval IM14400/SA14400 V.32bis (57600 baud)
SPEED 57600
INIT ATZ0|
PREFIX ATDT
SUFFIX |
CANCEL |
HANGUP ATS0=0H0|
ANSWER ATA|
TOGGLE DTR
HFLOW
BREAK 500
--------------------------------------------------------------------------------
MODEM Gateway 2000 TelePath FAX/Modem (v.32bis)
SPEED 38400
INIT ATZ|
PREFIX ATDT
SUFFIX |
CANCEL |
HANGUP ATS0=0H0|
ANSWER ATA|
TOGGLE DTR
HFLOW
BREAK 500
--------------------------------------------------------------------------------
MODEM Generic 1200 Baud Hayes clone
SPEED 1200
INIT ATE1Q0M1X1V1|
PREFIX ATDT
SUFFIX |
CANCEL |
HANGUP ^~^~^~+++^~^~^~ATH0|
HANGUP ATS0=0H0|
ANSWER ATA|
SFLOW
BREAK 1000
SWITCH If your modem has hardware switches or jumpers, be sure to set
SWITCH the modem so that it does NOT force Carrier Detect (this is
SWITCH usually switch #6). Also, set the DTR so that is NOT forced on
SWITCH all the time (this is usually switch #1). If your modem uses
SWITCH NRAM to store the configuration, you should use the Generic
SWITCH 1200 Baud (switchless) after this.
NOTE Your 1200 baud modem is ready to go! Be sure to read your modem
NOTE manual and double-check the setup.
--------------------------------------------------------------------------------
MODEM Generic 1200 Baud Hayes clone (switchless)
SPEED 1200
INIT ATZ|
PREFIX ATDT
SUFFIX |
CANCEL |
HANGUP ATS0=0H0|
ANSWER ATA|
TOGGLE DTR
SFLOW
BREAK 1000
NOTE Your 1200 baud modem is ready to go! Be sure to read your modem
NOTE manual and double-check the setup.
--------------------------------------------------------------------------------
MODEM Generic 2400 baud Hayes clone
SPEED 2400
INIT ATE1Q0M1X1V1|
PREFIX ATDT
SUFFIX |
CANCEL |
HANGUP ^~^~^~+++^~^~^~ATH0|
HANGUP ATS0=0H0|
ANSWER ATA|
SFLOW
BREAK 1000
SWITCH If your modem has hardware switches or jumpers, be sure to set
SWITCH the modem so that it does NOT force Carrier Detect (this is
SWITCH usually switch #6). Also, set the DTR so that is NOT forced on
SWITCH all the time (this is usually switch #1). If your modem uses
SWITCH NRAM to store the configuration, you should use the Generic
SWITCH 2400 (switchless) after this.
NOTE Your 2400 baud modem is ready to go! Be sure to read your
NOTE modem manual and double-check the setup.
--------------------------------------------------------------------------------
MODEM Generic 2400 Baud Hayes clone (switchless)
SPEED 2400
INIT ATZ|
PREFIX ATDT
SUFFIX |
CANCEL |
HANGUP ATS0=0H0|
ANSWER ATA|
TOGGLE DTR
SFLOW
BREAK 1000
NOTE Your 2400 baud modem is ready to go! Be sure to read your
NOTE modem manual and double-check the setup.
--------------------------------------------------------------------------------
MODEM GVC 9600 V.42
SPEED 19200
INIT ATZ|
PREFIX ATDT
SUFFIX |
CANCEL |
HANGUP ATS0=0H0|
ANSWER ATA|
TOGGLE DTR
HFLOW
BREAK 500
--------------------------------------------------------------------------------
MODEM GVC SM96 V.42bis
SPEED 38400
INIT ATZ|
PREFIX ATDT
SUFFIX |
CANCEL |
HANGUP ATS0=0H0|
ANSWER ATA|
TOGGLE DTR
HFLOW
BREAK 500
--------------------------------------------------------------------------------
MODEM Hayes Personal Modem 2400
SPEED 2400
INIT AT&C1&D2E1Q0|
PREFIX ATDT
SUFFIX |
CANCEL |
HANGUP ^~^~^~+++^~^~^~ATH0|
HANGUP ATS0=0H0|
ANSWER ATA|
SFLOW
BREAK 1000
--------------------------------------------------------------------------------
MODEM Hayes SmartModem 1200 External
SPEED 1200
INIT ATE1Q0M1X1V1S7=60|
PREFIX ATDT
SUFFIX |
CANCEL |
HANGUP ^~^~^~+++^~^~^~ATH0|
HANGUP ATS0=0H0|
ANSWER ATA|
SFLOW
BREAK 1000
SWITCH Switch Settings: 1 2 3 4 5 6 7 8 9 10
SWITCH U U D U D U U D U U
SWITCH
SWITCH Note: Early versions did not have switches 9 & 10.
--------------------------------------------------------------------------------
MODEM Hayes SmartModem 1200B Full Card Internal
SPEED 1200
INIT ATE1Q0M1X1V1S7=60|
PREFIX ATDT
SUFFIX |
CANCEL |
HANGUP ^~^~^~+++^~^~^~ATH0|
HANGUP ATS0=0H0|
ANSWER ATA|
SFLOW
BREAK 1000
SWITCH Hayes changed this version of the modem several times.
SWITCH Be aware that your modem may or may not have all of these
SWITCH switches or that these are the correct settings. Only
SWITCH your modem manual knows for sure...
SWITCH
SWITCH Switch Settings: #2 DOWN - RJ12/RJ13 phone jack
SWITCH UP - RJ11 or equivelent
SWITCH #3 UP - Allow true CD
SWITCH #4 UP - Allow DTR
SWITCH (early versions required strapping
SWITCH pins A-B for this function)
--------------------------------------------------------------------------------
MODEM Hayes SmartModem 1200B Half Card Internal
SPEED 1200
INIT ATE1Q0M1X1V1S7=60|
PREFIX ATDT
SUFFIX |
CANCEL |
HANGUP ^~^~^~+++^~^~^~ATH0|
HANGUP ATS0=0H0|
ANSWER ATA|
SFLOW
BREAK 1000
SWITCH Switch Settings: #2 RIGHT - RJ12/RJ13 phone jack
SWITCH LEFT - RJ11 or equivelent
SWITCH #3 RIGHT - Allow true CD
SWITCH #4 LEFT - Allow DTR
--------------------------------------------------------------------------------
MODEM Hayes SmartModem 2400
SPEED 2400
INIT ATZ|
PREFIX ATDT
SUFFIX |
CANCEL |
HANGUP ATS0=0H0|
ANSWER ATA|
TOGGLE DTR
SFLOW
BREAK 1000
--------------------------------------------------------------------------------
MODEM Hayes V-Series 2400
SPEED 2400
INIT ATZ|
PREFIX ATDT
SUFFIX |
CANCEL |
HANGUP ATS0=0H0|
ANSWER ATA|
TOGGLE DTR
HFLOW
BREAK 1000
--------------------------------------------------------------------------------
MODEM Hayes V-Series 9600
SPEED 19200
INIT ATZ|
PREFIX ATDT
SUFFIX |
CANCEL |
HANGUP ATS0=0H0|
ANSWER ATA|
TOGGLE DTR
HFLOW
BREAK 1000
--------------------------------------------------------------------------------
MODEM Hayes V-Series 9600 V.42
SPEED 19200
INIT ATZ|
PREFIX ATDT
SUFFIX |
CANCEL |
HANGUP ATS0=0H0|
ANSWER ATA|
TOGGLE DTR
HFLOW
BREAK 1000
--------------------------------------------------------------------------------
MODEM Hayes V-Series ULTRA Smartmodem 9600
SPEED 38400
INIT ATZ|
PREFIX ATDT
SUFFIX |
CANCEL |
HANGUP ATS0=0H0|
ANSWER ATA|
TOGGLE DTR
HFLOW
BREAK 1000
--------------------------------------------------------------------------------
MODEM Intel 2400EX MNP
SPEED 9600
INIT ATZ|
PREFIX ATDT
SUFFIX |
CANCEL |
HANGUP ATS0=0H0|
ANSWER ATA|
TOGGLE DTR
HFLOW
BREAK 500
--------------------------------------------------------------------------------
MODEM Intel 9600EX V.32/V.42bis
SPEED 38400
INIT ATZ|
PREFIX ATDT
SUFFIX |
CANCEL |
HANGUP ATS0=0H0|
ANSWER ATA|
TOGGLE DTR
HFLOW
BREAK 500
--------------------------------------------------------------------------------
MODEM Intel 14400EX V.32bis/V.42bis
SPEED 57600
INIT ATZ|
PREFIX ATDT
SUFFIX |
CANCEL |
HANGUP ATS0=0H0|
ANSWER ATA|
TOGGLE DTR
HFLOW
BREAK 500
--------------------------------------------------------------------------------
MODEM Microcom AX/1200 AX/2400
SPEED 9600
INIT ATZ|
PREFIX ATDT
SUFFIX |
CANCEL |^~|
HANGUP ATS0=0H0|
ANSWER ATA|
TOGGLE DTR
HFLOW
BREAK 1000
SWITCH Switch Settings: FRONT 1 2 3 4 5 6 7 8
SWITCH U D D U D U U D
SWITCH
SWITCH REAR 1 2 3 4 5 6 7 8
SWITCH D U D U D U D U
--------------------------------------------------------------------------------
MODEM Microcom AX/1200c AX/2400c MNP
SPEED 9600
INIT ATZ|
PREFIX ATDT
SUFFIX |
CANCEL |^~|
HANGUP ATS0=0H0|
ANSWER ATA|
TOGGLE DTR
HFLOW
BREAK 1000
SWITCH Switch Settings: FRONT 1 2 3 4 5 6 7 8
SWITCH U D D U D U U D
SWITCH
SWITCH REAR 1 2 3 4 5 6 7 8
SWITCH D U D U D U D U
--------------------------------------------------------------------------------
MODEM Microcom AX/9624c AX/9612c
SPEED 19200
INIT ATZ|
PREFIX ATDT
SUFFIX |
CANCEL |
HANGUP ATS0=0H0|
ANSWER ATA|
TOGGLE DTR
HFLOW
BREAK 1000
SWITCH Switch Settings: FRONT 1 2 3 4 5 6 7 8 9 10
SWITCH U D D D D U U D U U
SWITCH
SWITCH REAR 1 2 3 4 5 6 7 8
SWITCH D D D U D U D D
--------------------------------------------------------------------------------
MODEM Microcom QX/V.32c
SPEED 38400
INIT ATZ|
PREFIX ATDT
SUFFIX |
CANCEL |
HANGUP ATS0=0H0|
ANSWER ATA|
TOGGLE DTR
HFLOW
BREAK 1000
SWITCH Switch Settings: FRONT 1 2 3 4 5 6 7 8 9 10
SWITCH U D D U D U U D U
SWITCH
SWITCH REAR 1 2 3 4 5 6 7 8
SWITCH D U D U D D D D
--------------------------------------------------------------------------------
MODEM Microcom QX/4232hs
SPEED 38400
INIT ATZ|
PREFIX ATDT
SUFFIX |
CANCEL |
HANGUP ATS0=0H0|
ANSWER ATA|
TOGGLE DTR
HFLOW
BREAK 1000
SWITCH Switch Settings: FRONT 1 2 3 4 5 6 7 8 9 10
SWITCH U D U U U D D D U
SWITCH
SWITCH REAR 1 2 3 4 5 6 7 8
SWITCH D U D U D U U D
--------------------------------------------------------------------------------
MODEM Multi-Tech MultiModem 224EC / 224PC MNP
SPEED 9600
INIT ATZ|
PREFIX ATDT
SUFFIX |
CANCEL |
HANGUP ATS0=0H0|
ANSWER ATA|
TOGGLE DTR
HFLOW
BREAK 600
SWITCH 224EC: Switches on Back of Edgecard
SWITCH 1 OPEN (Up)
SWITCH 2 OPEN (Up)
SWITCH 3 CLOSED (Down)
SWITCH 4 CLOSED (Down)
--------------------------------------------------------------------------------
MODEM Multi-Tech MultiModem 224EH5 (MNP 5)
SPEED 9600
INIT ATZ|
PREFIX ATDT
SUFFIX |
CANCEL |
HANGUP ATS0=0H0|
ANSWER ATA|
TOGGLE DTR
HFLOW
BREAK 600
SWITCH Switch Settings on the Bottom of the modem:
SWITCH 4 Switch Bank 1 2 3 4
SWITCH D U D D
SWITCH 8 Switch Bank 1 2 3 4 5 6 7 8
SWITCH U U D U D U U D
SWITCH
--------------------------------------------------------------------------------
MODEM Multi-Tech MultiModem 224EH7 (MNP 7)
SPEED 19200
INIT ATZ|
PREFIX ATDT
SUFFIX |
CANCEL |
HANGUP ATS0=0H0|
ANSWER ATA|
TOGGLE DTR
HFLOW
BREAK 600
SWITCH Switch Settings on the Bottom of the modem:
SWITCH 4 Switch Bank 1 2 3 4
SWITCH D U D D
SWITCH 8 Switch Bank 1 2 3 4 5 6 7 8
SWITCH U U D U D U U D
SWITCH
SWITCH Jumpers that need to be changed -inside- the modem:
SWITCH CTS/RTS: toward the back of the modem.
--------------------------------------------------------------------------------
MODEM Multi-Tech MultiModem 224PC5
SPEED 2400
INIT ATZ|
PREFIX ATDT
SUFFIX |
CANCEL |
HANGUP ATS0=0H0|
ANSWER ATA|
TOGGLE DTR
HFLOW
BREAK 600
--------------------------------------------------------------------------------
MODEM Multi-Tech MultiModem 696E
SPEED 19200
INIT ATZ|
PREFIX ATDT
SUFFIX |
CANCEL |
HANGUP ATS0=0H0|
ANSWER ATA|
TOGGLE DTR
HFLOW
BREAK 600
SWITCH Switch Settings on the Bottom of the modem:
SWITCH 4 Switch Bank 1 2 3 4
SWITCH D U D D
SWITCH 8 Switch Bank 1 2 3 4 5 6 7 8
SWITCH U U D U D U U D
SWITCH
SWITCH Jumpers that need to be changed -inside- the modem:
SWITCH CTS/RTS: toward the back of the modem.
--------------------------------------------------------------------------------
MODEM Multi-Tech MultiModem 932EC
SPEED 19200
INIT ATZ|
PREFIX ATDT
SUFFIX |
CANCEL |
HANGUP ATS0=0H0|
ANSWER ATA|
TOGGLE DTR
HFLOW
BREAK 600
SETUP AT&F|
SETUP AT&E1&E4&E8&E10&E13&E15|
SETUP AT$MB9600$SB19200$BA0&W0|
--------------------------------------------------------------------------------
MODEM Multi-Tech MultiModem V.32
SPEED 19200
INIT ATZ|
PREFIX ATDT
SUFFIX |
CANCEL |
HANGUP ATS0=0H0|
ANSWER ATA|
TOGGLE DTR
HFLOW
BREAK 600
SWITCH Switch Settings on the Bottom of the modem:
SWITCH 4 Switch Bank 1 2 3 4
SWITCH D U D D
SWITCH 8 Switch Bank 1 2 3 4 5 6 7 8
SWITCH U U D U D U U D
SWITCH
SETUP AT&F|
SETUP AT&C1&D2B1E1M1Q0V1X4|
SETUP AT&E1&E4&E8&E10&E13&E15|
SETUP AT$MB9600$SB19200$BA0&W0|
--------------------------------------------------------------------------------
MODEM Multi-Tech MultiModem V.32/V.42bis
SPEED 38400
INIT ATZ|
PREFIX ATDT
SUFFIX |
CANCEL |
HANGUP ATS0=0H0|
ANSWER ATA|
TOGGLE DTR
HFLOW
BREAK 600
SWITCH Switch Settings on the Bottom of the modem:
SWITCH 4 Switch Bank 1 2 3 4
SWITCH D U D D
SWITCH 8 Switch Bank 1 2 3 4 5 6 7 8
SWITCH U U D U D U U D
SWITCH
SWITCH Jumpers that need to be changed -inside- the modem:
SWITCH Open the case and move the jumper labeled
SWITCH RTS/CTS so that the jumper it on the CTS side.
SETUP AT&F|
SETUP AT&C1&D2B1E1M1Q0V1X4|
SETUP AT&E1&E4&E8&E10&E13&E15|
SETUP AT$MB9600$SB38400$BA0&W0|
--------------------------------------------------------------------------------
MODEM NEC N9631 V.32 MNP
SPEED 19200
INIT ATZ|
PREFIX ATDT
SUFFIX |
CANCEL |
HANGUP ATS0=0H0|
ANSWER ATA|
TOGGLE DTR
HFLOW
BREAK 500
SETUP AT&F2|
SETUP ATE1Q0&T5\Q3\V1\X1NOTE FT1&W|
--------------------------------------------------------------------------------
MODEM OKITEL 2400 Plus
SPEED 9600
INIT ATZ|
PREFIX ATDT
SUFFIX |
CANCEL |
HANGUP ATS0=0H0|
ANSWER ATA|
TOGGLE DTR
HFLOW
BREAK 500
SWITCH Switch Settings:
SWITCH
SWITCH 1 2 3 4 5 6
SWITCH OFF OFF OFF OFF OFF ON
SWITCH
SETUP AT&F|
SETUP AT&C1&D2%C0\J0\N3\Q3\V1S25=4&W|
--------------------------------------------------------------------------------
MODEM Penril Alliance V.32
SPEED 19200
INIT ATZ|
PREFIX ATDT
SUFFIX |
CANCEL |
HANGUP ATS0=0H0|
ANSWER ATA|
TOGGLE DTR
HFLOW
BREAK 500
SETUP AT&F|
SETUP AT&C1&D2\Q1,1&W|
--------------------------------------------------------------------------------
MODEM Practical Peripherals PM2400
SPEED 2400
INIT ATZ|
PREFIX ATDT
SUFFIX |
CANCEL |
HANGUP ATS0=0H0|
ANSWER ATA|
TOGGLE DTR
SFLOW
BREAK 1000
SETUP ATB1E1L2M1Q0V1X4Y1&C1&D2&G0&J0&L0&P0|
SETUP AT&X0&Y0S0=0S2=43&W|
--------------------------------------------------------------------------------
MODEM Practical Peripherals PM2400SA MNP
SPEED 9600
INIT ATZ|
PREFIX ATDT
SUFFIX |
CANCEL |
HANGUP ATS0=0H0|
ANSWER ATA|
TOGGLE DTR
HFLOW
BREAK 500
SETUP ATB1E1L2M1Q0V1X4Y0&C1&D2&J0&P0|
SETUP AT\A3\C1\E0\G0\J0\K5\N3\Q3\V1\X0|
SETUP AT%C0%A0S0=0S2=43&W0|
--------------------------------------------------------------------------------
MODEM Practical Peripherals PM9600SA V.32
SPEED 38400
INIT ATZ|
PREFIX ATDT
SUFFIX |
CANCEL |
HANGUP ATS0=0H0|
ANSWER ATA|
TOGGLE DTR
HFLOW
BREAK 500
SETUP AT&F|
SETUP ATW2&C1&D2|
--------------------------------------------------------------------------------
MODEM Quicktel Series 9600 V.32/V.42
SPEED 19200
INIT ATZ|
PREFIX ATDT
SUFFIX |
CANCEL |
HANGUP ATS0=0H0|
ANSWER ATA|
TOGGLE DTR
HFLOW
BREAK 500
SETUP AT&F|
SETUP AT&C1&D2\Q3|
SWITCH On the bottom of the modem, locate the 8-Position
SWITCH DIP Switch. Verify that switch #7 and #8 are set OFF.
SWITCH
SWITCH Open the modem and locate the 4-Position DIP Switch.
SWITCH Switch #1, #2 and #3 should be set OFF. Switch #4 should
SWITCH be set ON.
--------------------------------------------------------------------------------
MODEM Sysdyne MDM 24H
SPEED 2400
INIT ATZ|
PREFIX ATDT
SUFFIX |
CANCEL |
HANGUP ATS0=0M1H0|
ANSWER ATA|
TOGGLE DTR
SFLOW
BREAK 750
SWITCH Switch settings should remain at factory defaults. If you need
SWITCH to select a different COM port other than 2, refer to your
SWITCH owners manual for detailed instructions.
SETUP ATB1E1F1L2M1Q0V1X4Y0|
SETUP AT&C1&D2S7=60S11=60&Y0&W0|
--------------------------------------------------------------------------------
MODEM Telebit T2000 & Trailblazer Plus
SPEED 19200
INIT ATZ|
PREFIX ATDT
SUFFIX |
CANCEL |
HANGUP ATH0|^~ATS0=0|
ANSWER ATA|
TOGGLE DTR
HFLOW
BREAK 1000
SETUP AT E1 Q0 M1 V1 W1 X14 Y0 S0=0|
SETUP AT S50=0 S51=254 S52=4 S54=3 S58=2|
SETUP AT S63=1 S64=0 S66=1 S67=0 S68=2 S90=0|
SETUP AT S92=1 S94=1 S95=2 S96=1 S110=1|
SETUP AT S111=0 S131=1 S255=0 &W1 &W2|
SWITCH This assumes the Telebit is in ECM (Enhanced Command Mode).
SWITCH To place your modem into ECM, follow these steps:
SWITCH
SWITCH 1. Start with the modem turned off and the A/B switch in the
SWITCH A position.
SWITCH 2. Press and hold the T/D switch while turning on the modem.
SWITCH Release the T/D switch -AFTER- the MR indicator comes on.
SWITCH
SWITCH This will store the ECM default settings in Profile A of non-
SWITHC volatile memory.
--------------------------------------------------------------------------------
MODEM Telebit T2500
SPEED 19200
INIT ATZ|
PREFIX ATDT
SUFFIX |
CANCEL |
HANGUP ATS0=0H0|
ANSWER ATA|
TOGGLE DTR
HFLOW
BREAK 1500
SETUP ATE1Q0M1X4V1S11=60|
SETUP AT&C1&D2&G0&J0&K3&L0&P0|
SETUP AT&Q5&W|
SWITCH This assumes the Telebit is in CCM (Conventional Command Mode).
SWITCH To place your modem into CCM, follow these steps:
SWITCH
SWITCH 1. Turn the modem off.
SWITCH 2. Hold in the T/D switch and turn the power on. Release the
SWITCH switch when the PEP,CD and MR lights are flashing. Ignore
SWITCH any other lights that may be lit from here on.
SWITCH 3. Tap the T/D switch until just the CD light is lit (not
SWITCH flashing). The PEP and MR lights are OFF.
SWITCH 4. Press and hold the T/D switch (2 seconds or more) until the
SWITCH CD light is flashing again.
--------------------------------------------------------------------------------
MODEM TwinCom 96/42i
SPEED 38400
INIT ATZ|
PREFIX ATDT
SUFFIX |
CANCEL |
HANGUP ATS0=0H0|
ANSWER ATA|
TOGGLE DTR
HFLOW
BREAK 500
SETUP AT&F|
SETUP AT&C1&D2\A3&W|
--------------------------------------------------------------------------------
MODEM UDS 2440
SPEED 9600
INIT ATZ|
PREFIX ATDT
SUFFIX |
CANCEL |
HANGUP ATS0=0H0|
ANSWER ATA|
TOGGLE DTR
HFLOW
BREAK 1000
SETUP AT&F|
SETUP ATS7=60|
SETUP AT&C1&D2&R&T5%N8%U3%V0%K1&W|
--------------------------------------------------------------------------------
MODEM UDS V.3224/V.3225 (V.32)
SPEED 19200
INIT ATZ|
PREFIX ATDT
SUFFIX |
CANCEL |
HANGUP ATS0=0H0|
ANSWER ATA|
TOGGLE DTR
HFLOW
BREAK 500
SETUP AT&F|
SETUP ATS7=60|
SETUP AT&C1&D2&R&T5%C1\Q3\V1&W|
--------------------------------------------------------------------------------
MODEM USRobotics Courier 2400e and 2400PC MNP
SPEED 2400
INIT ATZ|
PREFIX ATDT
SUFFIX |
CANCEL |
HANGUP ATS0=0H0|
ANSWER ATA|
TOGGLE DTR
HFLOW
BREAK 1000
SWITCH External Switchblock: 1 2 3 4 5 6 7 8 9 10
SWITCH U U D U D U U D D U
SWITCH
SWITCH Where U is UP and D is DOWN
SWITCH
SWITCH Note: for the 2400PC, turn the modem on it's side so
SWITCH you can read the numbers, then the above settings
SWITCH will make sense.
SETUP ATE1Q0M1X6V1S7=60S11=60|
SETUP AT&B0&H1&R2&I0&M4&N0&W|
SETUP AT&FE0|
--------------------------------------------------------------------------------
MODEM USRobotics Direct 1200PC internal
SPEED 1200
INIT ATE1Q0M1X1V1S7=60|
PREFIX ATDT
SUFFIX |
CANCEL |
HANGUP ^~^~^~+++^~^~^~ATS0=0M0|
ANSWER ATA|
SFLOW
BREAK 500
SWITCH External Switchblock:
SWITCH 1 2 3 4
SWITCH OFF OFF OFF OFF
SWITCH
SWITCH Jumpers:
SWITCH J1 UP
SWITCH J2 UP
SWITCH J3 DOWN
SWITCH J14 UP
--------------------------------------------------------------------------------
MODEM USRobotics Direct 2400PC / Sportster 2400
SPEED 2400
INIT ATE1Q0M1X6V1S7=60S11=60|
PREFIX ATDT
SUFFIX |
CANCEL |
HANGUP ATS0=0H0|
ANSWER ATA|
TOGGLE DTR
SFLOW
BREAK 500
SWITCH External Switchblock:
SWITCH
SWITCH 1 2 3 4 5 6 7 8 9 10
SWITCH OFF OFF ON OFF ON OFF OFF ON ON ON
SWITCH
--------------------------------------------------------------------------------
MODEM USRobotics HST ( 96x ROM)
SPEED 19200
INIT ATZ|
PREFIX ATDT
SUFFIX |
CANCEL |
HANGUP ATS0=0H0|
ANSWER ATA|
TOGGLE DTR
HFLOW
BREAK 500
SWITCH External switchblock: 1-UP 2-UP 3-DOWN 4-UP 5-DOWN
SWITCH 6-UP 7-UP 8-DOWN 9-DOWN 10-UP
SWITCH WIDE SWITCH-UP
SETUP ATE1Q0M1V1X7S7=60|
SETUP AT&B1&H1&M4&N0&R2&W|
--------------------------------------------------------------------------------
MODEM USRobotics HST (144x ROM)
SPEED 19200
INIT ATZ|
PREFIX ATDT
SUFFIX |
CANCEL |
HANGUP ATS0=0H0|
ANSWER ATA|
TOGGLE DTR
HFLOW
BREAK 500
SWITCH External switchblock: 1-UP 2-UP 3-DOWN 4-UP 5-DOWN
SWITCH 6-UP 7-UP 8-DOWN 9-DOWN 10-UP
SWITCH WIDE SWITCH-UP
SETUP ATE1Q0M1X7V1S7=60|
SETUP AT&B1&C1&D2&H1&M4&N0&R2&W|
--------------------------------------------------------------------------------
MODEM USRobotics HST (144x ROM) V.42
SPEED 38400
INIT ATZ|
PREFIX ATDT
SUFFIX |
CANCEL |
HANGUP ATS0=0H0|
ANSWER ATA|
TOGGLE DTR
HFLOW
BREAK 500
SWTICH External switchblock: 1-UP 2-UP 3-DOWN 4-UP 5-DOWN
SWITCH 6-UP 7-UP 8-DOWN 9-DOWN 10-UP
SWITCH WIDE SWITCH-UP
SETUP ATE1Q0M1X7V1S7=60|
SETUP AT&A3&K3&B1&C1&D2&H1&M4&N0&R2&W|
--------------------------------------------------------------------------------
MODEM USRobotics HST Dual Standard
SPEED 38400
INIT ATZ|
PREFIX ATDT
SUFFIX |
CANCEL |
HANGUP ATS0=0H0|
ANSWER ATA|
TOGGLE DTR
HFLOW
BREAK 500
SWITCH External switchblock: 1-UP 2-UP 3-DOWN 4-UP 5-DOWN
SWITCH 6-UP 7-UP 8-DOWN 9-DOWN 10-UP
SWITCH WIDE SWITCH-UP
SETUP AT&F|
SETUP ATB1E1Q0M1X7V1S7=60|
SETUP AT&A2&B1&C1&D2&H1&R2&M4&N0&K0&W|
--------------------------------------------------------------------------------
MODEM USRobotics HST Dual Standard V.42bis
SPEED 38400
INIT ATZ|
PREFIX ATDT
SUFFIX |
CANCEL |
HANGUP ATS0=0H0|
ANSWER ATA|
TOGGLE DTR
HFLOW
BREAK 500
SWTICH External switchblock: 1-UP 2-UP 3-DOWN 4-UP 5-DOWN
SWITCH 6-UP 7-UP 8-DOWN 9-DOWN 10-UP
SWITCH WIDE SWITCH-UP
SETUP AT&F|
SETUP ATB1E1Q0M1X7V1S7=60|
SETUP AT&A3&B1&C1&D2&H1&R2&M4&N0&K3&W|
--------------------------------------------------------------------------------
MODEM USRobotics HST V.32bis (Duals too)
SPEED 38400
INIT ATZ|
PREFIX ATDT
SUFFIX |
CANCEL |
HANGUP ATS0=0H0|
ANSWER ATA|
TOGGLE DTR
HFLOW
BREAK 500
SWITCH External switchblock: 1-UP 2-UP 3-DOWN 4-UP 5-DOWN
SWITCH 6-UP 7-UP 8-DOWN 9-DOWN 10-UP
SWITCH WIDE SWITCH-UP
SETUP AT&F|
SETUP ATE1Q0M1X7V1S7=60|
SETUP AT&A3&K3&B1&C1&D2&H1&M4&N0&R2&W|
--------------------------------------------------------------------------------
MODEM USRobotics MicroLink 2400
SPEED 2400
INIT ATE1Q0M1X6V1S7=60S11=60|
PREFIX ATDT
SUFFIX |
CANCEL |
HANGUP ATS0=0H0|
ANSWER ATA|
TOGGLE DTR
SFLOW
BREAK 500
SWITCH External Switchblock:
SWITCH
SWITCH 1 2 3 4 5 6 7 8 9 10
SWITCH OFF OFF ON OFF ON OFF OFF ON ON ON
SWITCH
--------------------------------------------------------------------------------
MODEM USRobotics Password 1200 internal
SPEED 1200
INIT ATE1Q0M1X1V1S7=60|
PREFIX ATDT
SUFFIX |
CANCEL |
HANGUP ^~^~^~+++^~^~^~ATS0=0M0|
ANSWER ATA|
SFLOW
BREAK 500
SWTICH External Switchblock:
SWITCH 1 2 3 4
SWITCH UP UP UP UP
SWITCH
SWITCH Jumpers:
SWITCH J1 UP
SWITCH J2 UP
SWITCH J3 RIGHT
SWITCH J5 DOWN
--------------------------------------------------------------------------------
MODEM USRobotics VARmodem 2400
SPEED 2400
INIT ATE1Q0M1X6V1S7=60S11=60|
PREFIX ATDT
SUFFIX |
CANCEL |
TOGGLE DTR
HANGUP ATS0=0H0|
ANSWER ATA|
SFLOW
BREAK 500
SWTICH External Switchblock:
SWITCH
SWITCH 1 2 3 4 5 6 7 8 9 10
SWITCH OFF OFF ON OFF ON OFF OFF ON ON ON
SWITCH
--------------------------------------------------------------------------------
MODEM Ven-Tel 2400 Half Card (4 Option Switches)
SPEED 2400
INIT ATZ|
PREFIX ATDT
SUFFIX |
CANCEL |
HANGUP ATS0=0H0|
ANSWER ATA|
TOGGLE DTR
SFLOW
BREAK 500
SWITCH Internal switchblock:
SWITCH
SWITCH Refer to your manual for setting the COM port via
SWITCH these switches. This is set with switches 3 and 4.
SETUP ATE1M1Q0X4V1&C1&D2&Y0S0=0&W|
--------------------------------------------------------------------------------
MODEM Ven-Tel 2400 Half Card (6 Option Switches)
SPEED 2400
INIT ATZ|
PREFIX ATDT
SUFFIX |
CANCEL |
HANGUP ^~^~^~+++^~^~^~ATH0|
ANSWER ATA|
SFLOW
BREAK 500
SWITCH Internal switchblock:
SWITCH 1 2 3 4 5 6
SWITCH O C * * O *
SWITCH
SWITCH Where O = OPEN, C = CLOSED
SWITCH * = Dependent on hardware. See manual.
SWITCH
SETUP ATE1M1Q0X4V1S0=0|
--------------------------------------------------------------------------------
MODEM Ven-Tel 2400-33
SPEED 9600
INIT ATZ|
PREFIX ATDT
SUFFIX |
CANCEL |
HANGUP ATS0=0H0|
ANSWER ATA|
TOGGLE DTR
HFLOW
BREAK 500
SWITCH External switchblock:
SWITCH 1-OFF 2-OFF 3-OFF 4-OFF 5-OFF
SWITCH 6-OFF 7-ON 8-ON 9-ON 10-OFF
SETUP AT%A13B1\C1&C1\D3&D2E1F1\G0&G0|
SETUP AT&L0M1&M0\N3Q0\Q3&R1\T0&T4V1|
SETUP AT\V1X4\X1Y0&W|
--------------------------------------------------------------------------------
MODEM Ven-Tel Pathfinder 18K
SPEED 19200
INIT ATZ|
PREFIX ATDT
SUFFIX |
CANCEL |
HANGUP ATS0=0H0|
ANSWER ATA|
TOGGLE DTR
HFLOW
BREAK 1000
SETUP AT&F|
SETUP AT X3 S0=0|
SETUP AT S51=5 S54=3 S58=2|
SETUP AT S66=1 S68=2 S92=1 S95=2|
SETUP AT S111=0 &W|
--------------------------------------------------------------------------------
MODEM ViVa 24m 2400 MNP
SPEED 9600
INIT ATZ|
PREFIX ATDT
SUFFIX |
CANCEL |
HANGUP ATS0=0H0|
ANSWER ATA|
TOGGLE DTR
HFLOW
BREAK 500
SETUP AT&F|
SETUP AT&C1&D2%C0\J0\N3\Q3\V1S25=4&W|
--------------------------------------------------------------------------------
MODEM ZOOM/Modem 2400 V.42bis
SPEED 9600
INIT AT&F&C1&D2S36=7S95=44|
PREFIX ATDT
SUFFIX |
CANCEL |
HANGUP ^~^~^~+++^~^~^~ATH0|
ANSWER ATA|
HFLOW
BREAK 1000
SETUP AT&F|
SETUP AT&W|
--------------------------------------------------------------------------------
MODEM ZOOM/Modem HC2400R
SPEED 2400
INIT AT&F&C1&D2|
PREFIX ATDT
SUFFIX |
CANCEL |
TOGGLE DTR
RING
HANGUP ATS0=0H0|
ANSWER ATA|
SLOW
BREAK 1000
SETUP AT&F|
SETUP AT&W|
--------------------------------------------------------------------------------
MODEM ZOOM/Modem HC2400S SendFax
SPEED 2400
INIT AT&F&C1&D2|
PREFIX ATDT
SUFFIX |
CANCEL |
HANGUP ATS0=0H0|
ANSWER ATA|
TOGGLE DTR
SFLOW
BREAK 1000
SETUP AT&F|
SETUP AT&W|
--------------------------------------------------------------------------------
MODEM ZOOM/Modem MX2400R
SPEED 2400
INIT AT&F&C1&D2|
PREFIX ATDT
SUFFIX |
CANCEL |
HANGUP ATS0=0H0|
ANSWER ATA|
TOGGLE DTR
SFLOW
BREAK 1000
SETUP AT&F|
SETUP AT&W|
--------------------------------------------------------------------------------
MODEM ZOOM/Modem MX2400S SendFax
SPEED 2400
INIT AT&F&C1&D2|
PREFIX ATDT
SUFFIX |
CANCEL |
HANGUP ATS0=0H0|
ANSWER ATA|
TOGGLE DTR
SFLOW
BREAK 1000
SETUP AT&F|
SETUP AT&W|
--------------------------------------------------------------------------------
MODEM ZOOM/Modem V.32 with V.42bis
SPEED 38400
INIT AT&F&C1&D2S36=7S95=44|
PREFIX ATDT
SUFFIX |
CANCEL |
HANGUP ^~^~^~+++^~^~^~ATH0|
ANSWER ATA|
HFLOW
BREAK 1000
SETUP AT&F|
SETUP AT&W|
--------------------------------------------------------------------------------
MODEM ZyXEL U-1496, U-1496B, U-1496E/+
SPEED 57600 2
INIT ATZ^M
PREFIX ATDT
SUFFIX |
CANCEL |
HANGUP ~~~+++~~~ATH0|
ANSWER ATA|
TOGGLE DTR
HFLOW
BREAK 500
SETUP AT&F^M
SETUP ATQ0M1X6V1S7=60^M
SETUP AT&K4&B1&C1&D2&H3*E0&N0&W^M
NOTE For the best results set your baudrate to 57600 baud, though
NOTE if you do not have a 16550 UART installed on your serial card
NOTE you should use 38400 baud for more reliable results.
;
;
; ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
; (c) Copyright 1993 Wandoo Valley Software Corporation and Adam Blake
; All Rights Reserved WorldWide
; ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
;
Very nice! Thank you for this wonderful archive. I wonder why I found it only now. Long live the BBS file archives!
This is so awesome! 😀 I’d be cool if you could download an entire archive of this at once, though.
But one thing that puzzles me is the “mtswslnkmcjklsdlsbdmMICROSOFT” string. There is an article about it here. It is definitely worth a read: http://www.os2museum.com/wp/mtswslnk/