Contents of the MODEM.TXT file
Modem.bsc is a boyan script that will set your modem. If you have a modem
that supports MNP, you can run the MNP check, to see if your setup is
correctly configured for MNP operations.
To use this program, all that you need to do is to place modem.bsc is your
script directory. From the terminal mode, hit ALT-R and then
(this is assuming that nothing appeared on the status line). If something
appeared on the status line, clear the line with the delete key and then
hit enter. This should load the file manager with the script directory on
the screen. Highlight the MODEM.bsc file and hit enter. This will start
the modem.bsc script file.
There are about 75 different modem configurations available. Hopefully
your is contained here. If it's not, if you could forward the modem name
and specifications to me, I will gladly add it. If you have a Hayes
clone modem, you should be able to use the Generic setup.
If the settings for your modem don't work correctly, you should be able to
reset the modem to its factory defaults by entering AT&F. This is also
contained on the last page of the modem setup.
On Monday December 16, 1991 at 7:32 pm from Bowie Md