Category : Communication (modem) tools and utilities
Archive   : BOYMKS5E.ZIP
Filename : SCRIPT.BSC

 
Output of file : SCRIPT.BSC contained in archive : BOYMKS5E.ZIP
\\
\\ Script.bsc by: Lee Breeden
\\

\\ This script contains all of the commands for doing a mail and file
\\ calls with PCBoard. You need to setup a system script that sets all
\\ of the variables in the script. The this script has the variables in
\\ it, needs to be named in the scrit that is named in the dialing
\\ directory under script name.
\\
\\ ******************************************************************** \\
\\ Please note that this script will call the system back if it \\
\\ fails in different places. Use the \SVA[X] command with \\
\\ caution. If the system that your calling is long distance, BEWARE! \\
\\ ******************************************************************** \\
\\ Script using all variables V0-9 VA-H F=cursor position G=messages count
\\ H=Timer to wait for total messages.

|name
\IE+%VN,X[\eb]\svt[0]
\wp[1]\dm21[Starting to log name onto %SN]
\CA-[\SVA[X]\eb] \\ Checks carrier
\if+raphics[n q NS{\gb[name]] \\ looks for prompt
\if+irst[\! \@{\gb[name]] \\ looks for prompt
\if+ast[\@{\gb[name]] \\ looks for prompt
\if+required[\gb[name]] \\ looks for prompt
\if+Is this correct[{\gb[name]] \\ looks for prompt
\if+Re-enter your name[r{\gb[name]] \\ error messages
\if+CAUTION: Auto[{\SVA[X]\eb] \\ error messages
\if+Keyboard Time Expired[{\SVA[X]\eb] \\ error messages
\if+board is currently attempting to dial out[{\SVA[X]\eb] \\ error messages
\if+Automatic Disconnect[{\SVA[X]\eb] \\ error messages
\if+NO CARRIER[{\SVA[X]\eb] \\ error messages
\if+Did you forget[n{\SVA[X]\eb] \\ error messages
\if+assword[%PW{\SVN[X]\eb] \\ looks for prompt
{\pa[1]\gb[name]

|QUEST
\IE+%VQ,X[\eb] \\ This section will
\CA-[\SVA[X]\eb]\\WP[1]\CA-[\AB] \\ get you to the
\DM[Script running - connected to %SN] \\ command prompt.
\IF+(NS)[n{\GB[quest]] \\ This block will be
\IF+ontinue[{\GB[quest]] \\ called at the complete
\IF+mail[{\GB[quest]] \\ of many blocks used
\IF+(NS)non-stop?[n{\GB[quest]] \\ in this script.
\IF+Command?[{\SVQ[X]\SVT[0]\EB] \\ It is useful for
\IF+(Enter)[N{\GB[quest]] \\ unforeseen prompts
\IF+(Enter)=none?[{\GB[quest]] \\ that the sysop might
\IF+More?[n{\GB[quest]] \\ have lurking in the
\IF+respond[{\GB[quest]] \\ system.
\IF+Main Board Command?[{\SVQ[X]\SVT[0]\eb] \\
\IF+Scan Message Base[n{\GB[quest]] \\
\IF+assword[%PW{] \\
\IF+Your Main Board[{\SVQ[X]\SVT[0]\eb] \\
\+VT[1]
\IE+%VT,3[^K \pa[2]\gb[quest] \\ block to its beginning
\IE+%VT,5[{\svt[0]]\pa[2]\gb[quest] \\ block to its beginning

|2QUEST
\\ This block is EXACTLY the same as the one above only it will not
\\ register as being completed as the above one will.
\CA-[\SVA[X]\eb]\\WP[1]\CA-[\AB] \\ get you to the
\DM[Script running - connected to %SN] \\ command prompt.
\IF+(NS)[n{\GB[quest]] \\ This block will be
\IF+ontinue[{\GB[quest]] \\ called at the complete
\IF+mail[{\GB[quest]] \\ of many blocks used
\IF+(NS)non-stop?[n{\GB[quest]] \\ in this script.
\IF+Command?[{\SVT[0]\EB] \\ It is useful for
\IF+(Enter)[N{\GB[quest]] \\ unforeseen prompts
\IF+(Enter)=none?[{\GB[quest]] \\ that the sysop might
\IF+More?[n{\GB[quest]] \\ have lurking in the
\IF+respond[{\GB[quest]] \\ system.
\IF+Main Board Command?[{\SVT[0]\eb] \\
\IF+Scan Message Base[n{\GB[quest]] \\
\IF+assword[%PW{] \\
\IF+Your Main Board[{\SVT[0]\eb] \\
\+VT[1]
\IE+%VT,3[^K \pa[2]\gb[quest] \\ block to its beginning
\IE+%VT,5[{\svt[0]]\pa[2]\gb[quest] \\ block to its beginning


|mail
\IE+%VM,X[\eb]
\au-\dm21[Starting Mail block] \\ This will open the mail
\\ au- turn auto-dn-load off
\CA-[\SVA[X]\eb] \\ door from main command
op %V2{\PA[5]\SVM[X]\eb \\ waits 5 sec before door.

|QMul
\IE+%VS,X[\eb]
\CA-[\SVA[X]\eb] \\ display message
{\WF[ommand?]~u{\IW-[\SVS[]\bl[2quest]\gb[QMul]] \\ issue upload command
\wf[B01]\IW-[\SVS[]\bl[2quest]\gb[QMul]]
\ulz-[%V1]\it+[\dc-[copy %u:%v1 %U:1%V1]\DC-[del %U:%V1]]
\SVS[X]{\eb \\ above block renames
\\ *.rep to 1*.rep
|QMdl
\IE+%VG,X[\eb]
\dm22[Starting to do Mail Upload]\CA-[\SVA[X]\eb] \\Display message
\wp[1]{\WF[Command]~d{ \\issue command for dnload
\to[%VH]\wf[no messages were found]\IW+[q{\eb] \\ checks for messages
\to[254]\WF[(Y/N)]~y{ \\ waits for prompt
\CA-[\SVA[X]\eb] \IW+[\bl[renfile]]
\TO[254]\WF[B00]\iw-[\SVA[x]\eb]\dlz-[%v4]\IT-[\SVA[X]]\\ download mail packet.
\CA-[\SVA[X]\eb] ~~{\WF[Command?]~q{\to[40]\bl[2quest] \\ return to main.
\SVG[X]\eb

|MMul
\IE+%VS,X[\eb]
\dm22[Starting to do Mail Upload]\CA-[\SVA[X]\eb] \\ message display
~\if+Hit "[Enter"] to continue?[{] \\ if prompt do it.
\\if+Time Adjusted[{\SVA[X]\eb] \\ Some systems will
\if+Time Expired!![{\SVA[X]\eb] \\ error if not enough
\if+Automatic Logoff[{\SVA[X]\eb] \\ time to do file transfer
\WF[Command?]~u{\IW-[\SVS[]\bl[2quest]\gb[MMul]] \\ give upload command
\WF[B01]\IW-[\SVS[]\bl[2quest]\gb[MMul]]
\ulz-[%V1] \\ do Zmodem upload of mail
\it+[\dc-[copy %u:%v1 %U:1%V1]] \\ if successful ren file
\IT+[\DC-[del %U:%V1]] \\ del old file.
\SVS[X]\eb

|MMdl
\IE+%VG,X[\eb]
\dm23[Starting to do Mail Dnload]\CA-[\SVA[X]\eb] \\ Message display
\WP[1]{\TO[254]~\if+Hit "[Enter"] to continue?[{] \\ if prompt command
\\if+Time Adjusted[{\SVA[X]\eb] \\ some error messages
\if+Time Expired!![{\SVA[X]\eb] \\ some error messages
\if+Automatic Logoff[{\SVA[X]\eb] \\ some error messages
\WF[Command?]~d{ \\ Enter download command
\to[%VH]\WF[No Messages Found]\IW+[\sva[x]q{\eb]
\to[254]\wf[Total M]\IW-[q{\eb]~y{ \\check message
\CA-[\SVA[X]\eb]
\IW-[\wf[you]y{]
\CA-[\SVA[X]\eb] \IW+[\bl[renfile]]\CA-[\SVA[X]\eb]\\ make backups of the existing qwks
\TO[254]\WF[B00]\iw-[\SVA[x]\eb]\dlz-[%v4]\IT-[\SVA[X]]\\ do Zmodem transfer
\CA-[\SVA[X]\eb] \to[40]\WF[MarkMail Command?]q{ \\ Quit door
\pa[4]\bl[2quest]\SVG[X]\eb \\ run prompt command.
\SVG[X]\eb

|RMul
\IE+%VS,X[\eb]
\dm22[Starting to do Mail Upload]\CA-[\SVA[X]\eb] \\ message display
~\if+Hit "[Enter"] to continue?[{] \\ if prompt do it.
\\if+Time Adjusted[{\SVA[X]\eb] \\ Some systems will
\if+Time Expired!![{\SVA[X]\eb] \\ error if not enough
\if+Automatic Logoff[{\SVA[X]\eb] \\ time to do file transfer
\WF[Command?]~u{\IW-[\SVS[]\bl[2quest]\gb[RMul]] \\ give upload command
\WF[B01] \IW-[\SVS[]\bl[2quest]\gb[RMul]]
{\ulz-[%V1] \\ do Zmodem upload of mail
\it+[\dc-[copy %u:%v1 %U:1%V1]] \\ if successful ren file
\IT+[\DC-[del %U:%V1]] \\ del old file.
\SVS[X]\eb

|RMdl
\IE+%VG,X[\eb]
\dm23[Starting to do Mail Dnload]\CA-[\SVA[X]\eb] \\ Message display
\WP[1]{\TO[254]~\if+Hit "[Enter"] to continue?[{] \\ if prompt command
\\if+Time Adjusted[{\SVA[X]\eb] \\ some error messages
\if+Time Expired!![{\SVA[X]\eb] \\ some error messages
\if+Automatic Logoff[{\SVA[X]\eb] \\ some error messages
\CA-[\SVA[X]\eb] \WF[Command?]~d;y{ \\ Enter download command
\WF[checking]\IW+[\bl[renfile]] \\ make backups of the existing qwks
\CA-[\SVA[X]\eb] \TO[254]\WF[B00]\iw-[\SVA[x]\eb]\dlz-[%v4]\IT-[\SVA[X]]\\ do Zmodem transfer
\CA-[\SVA[X]\eb] \to[40]\WF[Command?]q{ \\ Quit door
\pa[4]\bl[2quest]\SVG[X]\eb \\ run prompt command.
\SVG[X]\eb

|KMul
\IE+%VS,X[\eb]
\dm22[Starting to do Mail Upload]\CA-[\SVA[X]\eb] \\ message display
~\if+Hit "[Enter"] to continue?[{] \\ if prompt do it.
\\if+Time Adjusted[{\SVA[X]\eb] \\ Some systems will
\if+Time Expired!![{\SVA[X]\eb] \\ error if not enough
\if+Automatic Logoff[{\SVA[X]\eb] \\ time to do file transfer
\WF[Command?]u{~\IW-[\SVS[]\bl[2quest]\gb[KMul]] \\ give upload command
\WF[B01]\IW-[\SVS[]\bl[2quest]\gb[KMul]]
{\ulz-[%V1] \\ do Zmodem upload of mail
\it+[\dc-[copy %u:%v1 %U:1%V1]] \\ if successful ren file
\IT+[\DC-[del %U:%V1]] \\ del old file.
\SVS[X]\eb

|KMdl
\IE+%VG,X[\eb]
{\dm23[Starting to do Mail Dnload]\CA-[\SVA[X]\eb] \\ Message display
\WP[1]{\TO[254]~\if+Hit "[Enter"] to continue?[{] \\ if prompt command
\CA-[\SVA[X]\eb]
\\if+Time Adjusted[{\SVA[X]\eb] \\ some error messages currently off.
\if+Time Expired!![{\SVA[X]\eb] \\ some error messages
\if+Automatic disconnect[{\SVA[X]\eb] \\ some error messages
\if+Automatic Logoff[{\SVA[X]\eb] \\ some error messages
\WF[Command?]~d{ \\ Enter download command
\to[%VH]\WF[No Messages Found]\IW+[q{\eb]
\to[254]\wf[Do You Want]~y{ \\check message
\CA-[\SVA[X]\eb]
\\to[254]\wf[Total M]~\rvd-[15]\dvd[9]\ie+%vd,%VG[\sve[M]]~y{ \\check message
\IW+[\bl[renfile] \\ make backups of the existing qwks
\TO[254]\CA-[\SVA[X]\eb] \WF[B00]\iw-[\SVA[x]\eb]\dlz-[%v4]\IT-[\SVA[X]]\\ do Zmodem transfer
\CA-[\SVA[X]\eb] \ie+%ve,M[\+vb[1]\gb[KMdl]\\if maximum # of messages re-due MM block
\CA-[\SVA[X]\eb] \to[40]\WF[Command?]q{ \\ Quit door
\pa[4]\bl[2quest]\SVG[X]\eb \\ run prompt command.
\SVG[X]\eb

|MRul \\MegaMail
\IE+%VS,X[\eb]
\dm23[Starting %v1 Mail upload]\PA[1]
\WF[B01]~\ULZ[%V1]
\it+[\dc-[copy %u:%V1 %U:1%V1]] \\ these commands I am not sure if
\IT+[\DC-[del %U:%V1]] \\ there needed w/Megamail.
\SVS[X]\eb

|MRdl
\IE+%VG,X[\eb]
\PA[5]\dm23[Starting %V4 Mail download]
\IW+[\bl[renfile] \\ make backups of the existing qwks
\to[254]\WF[B00]~\DLZ[%V4] \\ I have been told that this isn't
\to[40]\DM22[Leaving MegaMail Door]\SVG[X]\eb \\ needed... I don't really know.

|renfile
\CA-[\SVA[X]\eb]
\dm[ Altering file names ]
\lm[V0=%V0 Va=%Va Vb=%Vb VC=%VC ] \\ logs messages to disk about-
\lm[VD=%VD VE=%VE VF=%Vf VG=%VG ] \\ variables being used.
\IE+%Vb,9[\dc-[del %D:8%v4]\gb[8]] \\ From here to the end of the
\IE+%Vb,8[\dc-[del %D:7%v4]\gb[7]] \\ end of this section, these
\IE+%Vb,7[\dc-[del %D:6%v4]\gb[6]] \\ commands will rename the qwks
\IE+%Vb,6[\dc-[del %D:5%v4]\gb[5]] \\ to the defined setup.
\IE+%Vb,5[\dc-[del %D:4%v4]\gb[4]] \\ .
\IE+%Vb,4[\dc-[del %D:3%v4]\gb[3]] \\ .
\IE+%Vb,3[\dc-[del %D:2%v4]\gb[2]] \\ .
\IE+%Vb,2[\dc-[del %D:1%v4]\gb[1]] \\ .
\IE+%Vb,1[\gb[delfile]] \\ .
\IE+%Vb, [\gb[delfile]] \\ .
\IE-%V6,[\gb[delfile]] \\ .
|9 \\ .
\dc-[ren %d:8%v4 9%v4]\gb[8] \\ .
|8 \\ .
\dc-[ren %d:7%v4 8%v4]\gb[7] \\ .
|7 \\ .
\dc-[ren %d:6%v4 7%v4]\gb[6] \\ .
|6 \\ .
\dc-[ren %d:5%v4 6%v4]\gb[5] \\ .
|5 \\ .
\dc-[ren %d:4%v4 5%v4]\gb[4] \\ .
|4 \\ .
\dc-[ren %d:3%v4 4%v4]\gb[3] \\ .
|3 \\ .
\dc-[ren %d:2%v4 3%v4]\gb[2] \\ .
|2 \\ .
\dc-[ren %d:1%v4 2%v4]\gb[1] \\ .
|1 \\ .
\dc-[ren %d:%v4 1%v4]\gb[delfile] \\ * end of ren file commands *
|delfile \\ .
\dc-[del %d:%v4] \\ By default, this will delete one file.

|Prodoor \\ Probably will eliminate this one.
\dm[Entering prodoor]\CA-[\eb]
\to[20]\wf[ommand]{\iw-[\gb[prodoor]] \\ enters prodoor if not successful
\wf[ommand]open %V3{\pa[5] \\ at prompt try again. Open other
\eb \\ wise.

|FILES
\fe+%S:%VI.up[\sv3[5]\SVT[0]\bl[fileInfo]]
\ie+N,%VC[\eb] \CA-[\SVA[X]\eb] \IE+%VF,X[\eb]
\CA-[\eb]\dm[Scanning for new files]\WP[1] \\ check carrier
\wf[ommand]n s %VC ns{\pa[2] \\ issues command for new file
\to[60]\bl[2quest] \\ scan and then runs quest block
\eb

|FileInfo
\CA-[\SVA[X]\eb]
\dm22,22[fileinfo block, getting file name]
\GV0[%S:%VI.up] \\ Reads info on current line of file
\II+%V0,^Z[ \gv[] \BL[upload] \bl[clear] \bl[upclean] \ST[ ]\eb]
\\ This checks for end of file marker.
\II+%V0,"+[ \BL[upload] \bl[clear] \GB[FileInfo] ] \\ If "+" is on this line
\\ do U/L and repeat block.
\II+%V0,"*[\EB] \\ If "*" is on this line \eb and
\\ then do U/L
\SV%V3[%V0]\+v3[1] \GB[FileInfo] \\ sends info and repeats block.

|clear
\sv5[]\sv6[]\sv7[]\sv8[] \\ Clears info stored in variables 5-8
\sv3[5]\svt[0] \\ Set variable 3 to 5 for use in
\\ fileinfo block
|upclean
\dc-[copy %S:%VI.up %S:1%Vi.up]
\dc-[del %s:%vi.up]

|upload
\CA-[\SVA[X]\eb] \IE+%VU,X[\eb] \IE+%VT,7[\SVT[0]{]
\dm23,23[Starting file upload]\CA-[\eb] \\ check carrier
\if+Upload (Enter)=none?[{\eb] \\ issue upload & file name
\if+(Enter)=none?[{\eb] \\ issue upload & file name
\if+Enter the Filename[{\eb] \\ issue upload & file name
\if+? ([\bl[upinfo]\eb]
\if+Enter the Filename[\bl[upinfo]\eb]
\if+enter a description[\bl[upinfo]\eb]
\if+exists[\eb]
\if+duplicates[{\eb]
\if+ommand[u;%v5{\pa[2]\gb[upload]] \\ issue upload & file name
\pa[2]\+VT[1]\gb[upload]
\eb

|upinfo
\CA-[\SVA[X]\eb]\to[5]
\if+ommand[\eb]%V6{ \\ if not correct prompt end
\II-%v7, [\WF[? ]%v7{|%v7{] \\ if not then add file
\II-%V8, [\WF[? ]%v8{|%v8{] \\ description.
{\pa[1]{\CA-[\SVA[X]\eb]
\fe+%U:%v5[\WF[B01]\ko[0]\ulz[%v5]{\bl[checking]\eb] \\ Start Zmodem transfer.
\fe+%D:%v5[\WF[B01]\ko[0]\ulz-[%D:%v5]{\bl[checking]\eb] \\ Start Zmodem transfer.
\fe+e:\host\%v5[\WF[B01]\ko[0]\ulz-[e:\host\%v5]{\bl[checking]\eb] \\ Start Zmodem transfer.
\eb

|checking
\to[20]\wf[ZIPLAB PLUS]
\IW+[\to[40]\pa[15]{~{] \\ If system does file check
\IW-[\to[40]\pa[5]{~{] \\ If system does file check
{\bl[2quest]\eb \\ pause and then run quest bl.
\eb

|dowlst
\CA-[\SVA[X]\eb]
\GV0[%S:%VI.dow] \\ Reads info on current line of file
\IE+%V0,^Z[ \gv[] \ST[ ] \bl[wipefile] \eb]\\ This checks for end of file marker.
\SV9[%V0] \bl[download] \GB[dowlst] \\ sends info and repeats block.

|upclear
\sv0[]\sv9[] \\ Clears info stored in variables 0&9

|wipefile
\dc-[copy %S:%VI.dow %S:1%VI.dow]
\dc-[del %S:%VI.dow]

|download
\IE+%VD,X[\eb]
\fe+%D:%V9[\eb]
\fe+%U:%V9[\eb]
\CA-[\eb]\dm8[Starting file dnload]{ \\ check carrier
\if+Insufficient time remaining[\bl[2quest]\eb]\\looking for time - endblock
\if+found on disk![\bl[2quest]\eb] \\ looking for found to - endblock
\if+ommand[db;%v9{\gb[download]] \\ looking for command to - download
\if+ilespec[{\gb[download]] \\ execute download commands
\if+(1) Enter the filename[{\bl[2quest]\eb] \\ error message and abort block
\if+(G)oodbye after Batch[{\gb[download]] \\ looking for this to proceed
\if+(A)dd a File[{\gb[download]] \\ looking for this to proceed
\if+Download (Enter)=none?[{\gb[download]] \\ looking for this to proceed
\if+(2) Enter the filename[{\gb[download]] \\ looking for this to proceed
\if+(3) Enter the filename[{\gb[download]] \\ looking for this to proceed
\if+(4) Enter the filename[{\gb[download]] \\ looking for this to proceed
\if+(5) Enter the filename[{\gb[download]] \\ looking for this to proceed
\if+B00[\dlz[%V9]\pa[1]\bl[2quest]\eb \\ waits for Zmodem signal/dnloads
\if+Transfer Ended[\bl[2quest]\eb] \\ Cycles quest block
\if+found[\bl[2quest]\eb] \\ Error message and quest block
\pa[2]{\gb[download]
\eb

|logoff \\ Log off block
\svi[2%vi]\ca-[\ab]\svb[]\svc[]
\dm[Getting ready to log off] \\ Message display.
\wp[1]\ko[ ]\to[12]\au+ \\ check carrier & reset settings
\ca-[~~\ab]g y{~g{{ \\ issue oodbye command before hanging up.
\wl\to[40]
\eb \\ from block below

|calback \\ Call back block if error occurred
\dm20[ Script terminating, unable to log on ] \\ not get logged onto
\dm21[ You have three seconds to hit ESC ] \\ the system, lets try
\dm22[ before logging off this system. ] \\ again on another call.
\pa[3]\um[ %SN terminated at %HR %MI ] \\ place note in user log.
\qa+[%v0]\SVA[]{\ko[] \\ adds current system phone number to queue
\IE+ON,%LD[\LD-] \\ Checks log status and turns off if necessary
g{~atz{~\ab

|Settings
\sv0[1]
\DM4,%V0[ ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» ]\+V0[1]
\DM4,%V0[ º Current settings º ]\+V0[1]
\DM4,%V0[ ÌÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͹ ]\+V0[1]
\DM4,%V0[ º Avail. shell MEM : %DS º ]\+V0[1]
\DM4,%V0[ º Current Act Module : %AM º ]\+V0[1]
\DM4,%V0[ º Pervious Act Mod : %AP º ]\+V0[1]
\DM4,%V0[ º Beep & Bells : %BB º ]\+V0[1]
\DM4,%V0[ º 8Bit ON/OFF : %B8 º ]\+V0[1]
\DM4,%V0[ º Com Port : %MD º ]\+V0[1]
\DM4,%V0[ º Modem Speed : %MS º ]\+V0[1]
\DM4,%V0[ º Modem Parity : %MP º ]\+V0[1]
\DM4,%V0[ º Echo set to : %EC º ]\+V0[1]
\DM4,%V0[ º Uart Setting : %AU º ]\+V0[1]
\DM4,%V0[ º Line Feeds set to : %LF º ]\+V0[1]

\DM4,%V0[ º Current Printer Set: %PR º ]\+V0[1]
\DM4,%V0[ º Default Protocol : %DP ]\+V0[1]
\DM4,%V0[ º Current Log file : %LN ]\+V0[1]
\DM4,%V0[ º Path for Protocol : %P: ]\+V0[1]
\DM4,%V0[ º Current Phone dir : %FD ]\+V0[1]
\DM4,%V0[ º Connected to : %SN ]\+V0[1]
\DM4,%V0[ º Last filename : %TF ]\+V0[1]
\DM4,%V0[ º Current Dir : %C: ]\+V0[1]
\DM4,%V0[ º Download Directory : %D: ]\+V0[1]
\DM4,%V0[ ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ ]
\KV0_[Enter to Continue: ]
|*TAB \\ This runs automatically when pressed
\SV0[1] \KS
\DM38,%V0[ ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» ] \+V0[1]
\DM38,%V0[ º OnLine MENU %HR:%MI %Mo/%DA/%YR º ] \+V0[1]
\DM38,%V0[ ÌÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͹ ] \+V0[1]
\DM38,%V0[ º = find main Command º ] \+V0[1]
\DM38,%V0[ º = Download a file º ] \+V0[1]
\DM38,%V0[ º = Download Mail (from mail door) º ] \+V0[1]
\DM38,%V0[ º = Edit Script º ] \+V0[1]
\DM38,%V0[ º = File Manager º ] \+V0[1]
\DM38,%V0[ º = Goodbye º ] \+V0[1]
\DM38,%V0[ º = Jump to DOS º ] \+V0[1]
\DM38,%V0[ º = Log to disk ...status %LD º ] \+V0[1]
\DM38,%V0[ º = Mail (check for your mail) º ] \+V0[1]
\DM38,%V0[ º = New File Scan º ] \+V0[1]
\DM38,%V0[ º = Open Door º ] \+V0[1]
\DM38,%V0[ º

= edit Phone directory º ] \+V0[1]
\DM38,%V0[ º = Quick Note file º ] \+V0[1]
\DM38,%V0[ º = Scroll-back buffer º ] \+V0[1]
\DM38,%V0[ º = Termanial Mode º ] \+V0[1]
\DM38,%V0[ º = Upload a file º ] \+V0[1]
\DM38,%V0[ º = Upload Mail (from mail door) º ] \+V0[1]
\DM38,%V0[ ÇÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄĶ ] \+V0[1]
\DM38,%V0[ º = RESUME Script Manual Macro º ] \+V0[1]
\DM38,%V0[ º= ABORT script iew Settings º ] \+V0[1]
\DM38,%V0[ ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ ]
\KO[30] \BB+ \KV0__[Enter OPTION: ] \BB- \RS
\IV0+C[\SVQ[]\SC[SCRIPT;quest]\gb[termlines]]
\IV0+DM[\SVG[]\SC[SCRIPT;KMdl]]
\IV0+D[\SVD[]\SC[SCRIPT;Download]]
\IV0+E[\DC-[%WC %S:%VY]\gb[*tab]]
\IV0+G[\SC[SCRIPT;logoff]\EB]
\IV0+F[\FM[]\gb[*tab]]
\IV0+J[\JD\gb[*tab]]
\IV0+L[\LD*\gb[*tab]]
\IV0+M[R Y{\GB[termlines]]
\IV0+?[\KV9[MACRO:] \LV9[] \IE+%LV,1[\SV9[%V9]]\gb[*tab]]
\IV0+N[\SVF[]N S U N{\GB[termlines]]
\IV0+O[\SVM[]op %V2 {\GB[termlines]]
\IV0+P[ \DI[] \GB[*Tab] ]
\IV0+Q[\DC-[%WC %B:notes.txt]]
\IV0+R[\gs[%VY;menu]]
\IV0+S[\RB\gb[*Tab]]
\IV0+T[\gb[termlines]\gb[*tab]]
\IV0+UM[\SVS[]\SC[SCRIPT;KMul]\gb[*tab]]
\IV0+U[\SVU[]\SC[SCRIPT;upload]\gb[*tab]]
\IV0+V[\SC[SCRIPT;settings]\gb[*tab]]
\GB[*TAB]

|TermLines
\to[120]
\ST[ ¯ Press for Menu options ®]
\RE[\CA-[\ab] \IK+[%IK]]





  3 Responses to “Category : Communication (modem) tools and utilities
Archive   : BOYMKS5E.ZIP
Filename : SCRIPT.BSC

  1. Very nice! Thank you for this wonderful archive. I wonder why I found it only now. Long live the BBS file archives!

  2. This is so awesome! 😀 I’d be cool if you could download an entire archive of this at once, though.

  3. But one thing that puzzles me is the “mtswslnkmcjklsdlsbdmMICROSOFT” string. There is an article about it here. It is definitely worth a read: http://www.os2museum.com/wp/mtswslnk/