Category : C Source Code
Archive   : ZIPSRC19.ZIP
Filename : BITS.C

 
Output of file : BITS.C contained in archive : ZIPSRC19.ZIP
/*

Copyright (C) 1990-1992 Mark Adler, Richard B. Wales, Jean-loup Gailly,
Kai Uwe Rommel and Igor Mandrichenko.
Permission is granted to any individual or institution to use, copy, or
redistribute this software so long as all of the original files are included
unmodified, that it is not sold for profit, and that this copyright notice
is retained.

*/

/*
* bits.c by Jean-loup Gailly and Kai Uwe Rommel.
*
* This is a new version of im_bits.c originally written by Richard B. Wales
*
* PURPOSE
*
* Output variable-length bit strings. Compression can be done
* to a file or to memory.
*
* DISCUSSION
*
* The PKZIP "deflate" file format interprets compressed file data
* as a sequence of bits. Multi-bit strings in the file may cross
* byte boundaries without restriction.
*
* The first bit of each byte is the low-order bit.
*
* The routines in this file allow a variable-length bit value to
* be output right-to-left (useful for literal values). For
* left-to-right output (useful for code strings from the tree routines),
* the bits must have been reversed first with bi_reverse().
*
* For in-memory compression, the compressed bit stream goes directly
* into the requested output buffer. The input data is read in blocks
* by the mem_read() function.
*
* INTERFACE
*
* void bi_init (FILE *zipfile)
* Initialize the bit string routines.
*
* void send_bits (int value, int length)
* Write out a bit string, taking the source bits right to
* left.
*
* int bi_reverse (int value, int length)
* Reverse the bits of a bit string, taking the source bits left to
* right and emitting them right to left.
*
* void bi_windup (void)
* Write out any remaining bits in an incomplete byte.
*
* void copy_block(char far *buf, unsigned len, int header)
* Copy a stored block to the zip file, storing first the length and
* its one's complement if requested.
*
* int seekable(void)
* Return true if the zip file can be seeked.
*
* ulg memcompress (char *tgt, ulg tgtsize, char *src, ulg srcsize);
* Compress the source buffer src into the target buffer tgt.
*/

#include "zip.h"

/* ===========================================================================
* Local data used by the "bit string" routines.
*/

local FILE *zfile; /* output zip file */

local unsigned short bi_buf;
/* Output buffer. bits are inserted starting at the bottom (least significant
* bits).
*/

#define Buf_size (8 * 2*sizeof(char))
/* Number of bits used within bi_buf. (bi_buf might be implemented on
* more than 16 bits on some systems.)
*/

local int bi_valid;
/* Number of valid bits in bi_buf. All bits above the last valid bit
* are always zero.
*/

char file_outbuf[1024];
/* Output buffer for compression to file */

local char *in_buf, *out_buf;
/* Current input and output buffers. in_buf is used only for in-memory
* compression.
*/

local ulg in_offset, out_offset;
/* Current offset in input and output buffers. in_offset is used only for
* in-memory compression.
*/

local ulg in_size, out_size;
/* Size of current input and output buffers */

int (*read_buf) OF((char *buf, unsigned size)) = file_read;
/* Current input function. Set to mem_read for in-memory compression */

#ifdef DEBUG
ulg bits_sent; /* bit length of the compressed data */
#endif

/* Output a 16 bit value to the bit stream, lower (oldest) byte first */
#define PUTSHORT(w) \
{ if (out_offset < out_size-1) { \
out_buf[out_offset++] = (char) ((w) & 0xff); \
out_buf[out_offset++] = (char) ((ush)(w) >> 8); \
} else { \
flush_outbuf((w),2); \
} \
}

#define PUTBYTE(b) \
{ if (out_offset < out_size) { \
out_buf[out_offset++] = (char) (b); \
} else { \
flush_outbuf((b),1); \
} \
}


/* ===========================================================================
* Prototypes for local functions
*/
local int mem_read OF((char *buf, unsigned size));
local void flush_outbuf OF((unsigned w, unsigned size));

/* ===========================================================================
* Initialize the bit string routines.
*/
void bi_init (zipfile)
FILE *zipfile; /* output zip file, NULL for in-memory compression */
{
zfile = zipfile;
bi_buf = 0;
bi_valid = 0;
#ifdef DEBUG
bits_sent = 0L;
#endif

/* Set the defaults for file compression. They are set by memcompress
* for in-memory compression.
*/
if (zfile != NULL) {
out_buf = file_outbuf;
out_size = sizeof(file_outbuf);
out_offset = 0;
read_buf = file_read;
}
}

/* ===========================================================================
* Send a value on a given number of bits.
* IN assertion: length <= 16 and value fits in length bits.
*/
void send_bits(value, length)
int value; /* value to send */
int length; /* number of bits */
{
#ifdef DEBUG
Tracevv((stderr," l %2d v %4x ", length, value));
Assert(length > 0 && length <= 15, "invalid length");
bits_sent += (ulg)length;
#endif
/* If not enough room in bi_buf, use (valid) bits from bi_buf and
* (16 - bi_valid) bits from value, leaving (width - (16-bi_valid))
* unused bits in value.
*/
if (bi_valid > (int)Buf_size - length) {
bi_buf |= (value << bi_valid);
PUTSHORT(bi_buf);
bi_buf = (ush)value >> (Buf_size - bi_valid);
bi_valid += length - Buf_size;
} else {
bi_buf |= value << bi_valid;
bi_valid += length;
}
}

/* ===========================================================================
* Reverse the first len bits of a code, using straightforward code (a faster
* method would use a table)
* IN assertion: 1 <= len <= 15
*/
unsigned bi_reverse(code, len)
unsigned code; /* the value to invert */
int len; /* its bit length */
{
register unsigned res = 0;
do {
res |= code & 1;
code >>= 1, res <<= 1;
} while (--len > 0);
return res >> 1;
}

/* ===========================================================================
* Flush the current output buffer.
*/
local void flush_outbuf(w, size)
unsigned w; /* value to flush */
unsigned size; /* it size in bytes (0, 1 or 2) */
{
if (zfile == NULL) {
error("output buffer too small for in-memory compression");
}
/* Encrypt and write the output buffer: */
if (out_offset != 0) {
zfwrite(out_buf, 1, (extent)out_offset, zfile);
if (ferror(zfile)) error ("write error on zip file");
}
out_offset = 0;
if (size == 2) {
PUTSHORT(w);
} else if (size == 1) {
out_buf[out_offset++] = (char) (w & 0xff);
}
}

/* ===========================================================================
* Write out any remaining bits in an incomplete byte.
*/
void bi_windup()
{
if (bi_valid > 8) {
PUTSHORT(bi_buf);
} else if (bi_valid > 0) {
PUTBYTE(bi_buf);
}
if (zfile != NULL) {
flush_outbuf(0, 0);
}
bi_buf = 0;
bi_valid = 0;
#ifdef DEBUG
bits_sent = (bits_sent+7) & ~7;
#endif
}

/* ===========================================================================
* Copy a stored block to the zip file, storing first the length and its
* one's complement if requested.
*/
void copy_block(buf, len, header)
char far *buf; /* the input data */
unsigned len; /* its length */
int header; /* true if block header must be written */
{
bi_windup(); /* align on byte boundary */

if (header) {
PUTSHORT((ush)len);
PUTSHORT((ush)~len);
#ifdef DEBUG
bits_sent += 2*16;
#endif
}
if (zfile) {
flush_outbuf(0, 0);
zfwrite(buf, 1, len, zfile);
if (ferror(zfile)) error ("write error on zip file");
} else if (out_offset + (ulg)len > out_size) {
error("output buffer too small for in-memory compression");
} else {
memcpy(out_buf + out_offset, buf, len);
out_offset += (ulg)len;
}
#ifdef DEBUG
bits_sent += (ulg)len<<3;
#endif
}


/* ===========================================================================
* Return true if the zip file can be seeked. This is used to check if
* the local header can be re-rewritten. This function always returns
* true for in-memory compression.
* IN assertion: the local header has already been written (ftell() > 0).
*/
int seekable()
{
return (zfile == NULL ||
(fseek(zfile, -1L, SEEK_CUR) == 0 &&
fseek(zfile, 1L, SEEK_CUR) == 0));
}

/* ===========================================================================
* In-memory compression. This version can be used only if the entire input
* fits in one memory buffer. The compression is then done in a single
* call of memcompress(). (An extension to allow repeated calls would be
* possible but is not needed here.)
* The first two bytes of the compressed output are set to a short with the
* method used (DEFLATE or STORE). The following four bytes contain the CRC.
* The values are stored in little-endian order on all machines.
* This function returns the byte size of the compressed output, including
* the first six bytes (method and crc).
*/

ulg memcompress(tgt, tgtsize, src, srcsize)
char *tgt, *src; /* target and source buffers */
ulg tgtsize, srcsize; /* target and source sizes */
{
ush att = (ush)UNKNOWN;
ush flags = 0;
ulg crc = 0;
int method = DEFLATE;

if (tgtsize <= 6L) error("target buffer too small");

crc = updcrc((char *)NULL, 0);
crc = updcrc(src, (extent) srcsize);

read_buf = mem_read;
in_buf = src;
in_size = srcsize;
in_offset = 0;

out_buf = tgt;
out_size = tgtsize;
out_offset = 2 + 4;

bi_init(NULL);
ct_init(&att, &method);
lm_init(level, &flags);
deflate();

/* For portability, force little-endian order on all machines: */
tgt[0] = (char)(method & 0xff);
tgt[1] = (char)((method >> 8) & 0xff);
tgt[2] = (char)(crc & 0xff);
tgt[3] = (char)((crc >> 8) & 0xff);
tgt[4] = (char)((crc >> 16) & 0xff);
tgt[5] = (char)((crc >> 24) & 0xff);

return out_offset;
}

/* ===========================================================================
* In-memory read function. As opposed to file_read(), this function
* does not perform end-of-line translation, and does not update the
* crc and input size.
* Note that the size of the entire input buffer is an unsigned long,
* but the size used in mem_read() is only an unsigned int. This makes a
* difference on 16 bit machines. mem_read() may be called several
* times for an in-memory compression.
*/
local int mem_read(buf, size)
char *buf;
unsigned size;
{
if (in_offset < in_size) {
ulg block_size = in_size - in_offset;
if (block_size > (ulg)size) block_size = (ulg)size;
memcpy(buf, in_buf + in_offset, (unsigned)block_size);
in_offset += block_size;
return (int)block_size;
} else {
return 0; /* end of input */
}
}


  3 Responses to “Category : C Source Code
Archive   : ZIPSRC19.ZIP
Filename : BITS.C

  1. Very nice! Thank you for this wonderful archive. I wonder why I found it only now. Long live the BBS file archives!

  2. This is so awesome! 😀 I’d be cool if you could download an entire archive of this at once, though.

  3. But one thing that puzzles me is the “mtswslnkmcjklsdlsbdmMICROSOFT” string. There is an article about it here. It is definitely worth a read: http://www.os2museum.com/wp/mtswslnk/