Contents of the SEALINK.DOC file
File Transfer Protocol
9 February 1987
(C) COPYRIGHT 1986,87 by System Enhancement Associates, Inc.
This document describes briefly the SEAlink file transfer protocol
developers' package. SEAlink is a sliding window protocol that is
fully backwards compatible with XMODEM in all tested implementations.
The intent of SEAlink is to provide a file transfer protocol that does
not suffer from propagation delays, such as are introduced by
satellite relays or packet switched networks. Actual tests of the
enclosed routines has shown that SEAlink is capable of virtually
eliminating propagation delays and turnaround delays. File transfers
between New Jersey and Hawaii, which normally suffer a degradation of
50% or more due to satellite relays, proceed as fast as local
transfers. Even transfers within the local exchange are speeded up by
up to 20% at 2400 baud by the elimination of turnaround delays. Large
volume tests show that SEAlink is capable of coming to within 2% of
the theoretical minimum time for data transfer.
The developers' package contains the following files:
SEALINK.DOC This document.
SEALINK.C A set of C routines for implementing SEAlink.
CLINK.EXE A sample TTY program that implements SEAlink.
You are granted a license to use this code in your programs, and to
adapt it to your particular situation and needs, subject only to the
1) You must refer to it as the SEAlink protocol, and you must give
credit to System Enhancement Associates.
2) If you modify it in such a way that your version cannot converse
with the original code as supplied by us, then you should refer to
it as "SEAlink derived", or as a "variation of SEAlink", or words
to that effect.
In short, we're not asking for any money, but we'd like to get some
credit for our work.
This document is not meant to be a rigorous definition of the
protocol. The code provided should serve to document the details and
fine points of implementing SEAlink. We will, however, present a
brief synopsis of how SEAlink adds sliding windows to XMODEM, and why
XMODEM doesn't mind.
First of all, SEAlink adds a block number to the ACK and NAK used in
XMODEM.(1) We thus create "ACK/NAK packets", with the following
Byte 0: ACK, NAK, or C
Byte 1: Block number
Byte 2: One's compliment of block number
This is identical in form to the first three bytes of a data packet,
except that the SOH has been replaced with an ACK or NAK.(2)
From the receiver's point of view, it does not matter if the trans-
mitter is using sliding window or not. The receiver simply sends ACK
and NAK packets as appropriate. Any XMODEM driver tested to date will
simply ignore this excess data behind the ACK or NAK.
From the transmitter's point of view, it just barely matters if the
receiver can handle sliding window. The transmitter always acts as if
it is sending sliding window, but varies the window size. If it is
seeing valid block numbers and check values behind the received ACKs
and NAKs, it sets the window size to six blocks. Otherwise, it sets
the window size to one block. The result is that it only "sends
ahead" if the receiver can handle it.
It should be a fairly simple matter to apply the underlying SEAlink
logic to almost any variant of XMODEM.
The SEAlink routines provided in this package are also capable of
passing system dependent information, such as true file size and time
of last modification. This data is passed in a special header block.
The header block looks exactly like any other block, except that it is
block number zero.
This is still backwards compatible with XMODEM, as a SEAlink receiver
does not mind if block zero is missing, and any XMODEM receiver yet
tested will regard block zero as a duplicate block and ACK it.
The data portion of block zero contains the following fields:
Offset Size Contents
====== ==== ========
0 4 Original file length.
4 4 Date and time file was last mofified, in
seconds since 1979.
8 17 Original file name, as a null terminated
25 15 Name of transmitting program, as a null
40 88 Null filler and expansion area.
(1) XMODEM/CRC uses a "C" in place of a NAK to indicate CRC error
detection. SEAlink follows this convention, and supports either
checksum or CRC. For brevity, this document will use the term NAK
to mean either a true NAK (hex 15) or a C (hex 43).
(2) See previous footnote.
Any field which the transmitter cannot support should be set to all
zeros. Conversly, the receiver should ignore any null fields. The
receiver may ignore any field which he cannot support.
The routines enclosed in this package should be reasonably easy to
implement in your application. We have attempted to exclude compiler
dependent and system dependent logic from these routines.
You will need to alter our references to our communications driver to
conform to your own driver. The communications related routines we
com_putc(c) Output character c to comm port.
int com_getc(t) Get character from comm port within t tenths
of a second. Return EOF if time limit
com_dump() Discard any pending output without sending it.
In addition, we use the following routines for controlling timed
long timerset(t) Set a timer. Returns a timer value which will
expire in t tenths of a second.
int timeup(z) Check a timer. Returns true if timer z has
expired yet, or false otherwise.
These routines also make reference to the following functions for
system dependent information, which is optional:
filestat(name,&fs) Read directory entry for a file and return
system dependent information.
setstamp(f,dtg) Set a file's date/time of last modification.
The SEAlink implementation provided in this package is used by
invoking the two primary routines:
int xmtfile(name) /* transmit a file */
char *name; /* name of file to transmit */
This routine is used to send a file. One file is sent at a time. If
the name is blank (name is null or *name points to a null), then an
end of transmission marker is sent.
This routine returns a one if the file is successfully transmitted, or
a zero if a fatal error occurs.
char *rcvfile(name) /* receive a file */
char *name; /* name of file (optional) */
This routine is used to receive a file. One file is received. If a
name is specified for the file, then that name WILL be used, and any
name sent by the transmitter will be ignored. If the name is blank
(name is null or *name points to a null), then the transmitter must
provide a name for the file.
This routine returns a pointer to the name of the file that was
received. If the file transfer is not successful, then a null pointer
The pointer returned by rcvfile() points to a static data buffer.
This does not have to be freed (and should not be), but it will be
overwritten the next time rcvfile() is called.
The rcvfile() function works on a temporary file whose name is the
same as the final file, but with a dash ("-") added at the beginning.
If a file transfer is aborted, then this temporary file will be
retained. An aborted file transfer will not harm a pre-existing file
of the same name.
These routines can be used for either single or multiple file
To send multiple files, send each file one by one until either a
transmit fails or all files are sent. If all files are sent, then
signal the end by calling xmtfile() with a null pointer.
To receive multiple files, call rcvfile() repeatedly until it returns
a null pointer.
This package includes a demonstration program named CLINK (pronounced
"clink"), which is a simple TTY program for doing SEAlink file
transfers. CLINK does not perform any sort of terminal emulation
whatsoever. However, she will make use of the ANSI.SYS screen driver
if you have it installed.
CLINK may be used in either of two ways: interactive mode or command
To use CLINK in the interactive mode, give the command "CLINK" with no
arguments. Press the "ESCape" key to give a command to CLINK. The
command "?" (question mark) instructs CLINK to tell you what commands
To use CLINK in the command mode, give the command "CLINK" with an
argument. There are three arguments you can give CLINK in the command
mode. These are:
1) Receive files; Do this with a command of the form:
CLINK will attempt to receive one or more files from COM1, and
will terminate as soon as all files are received, or when the
2) Transmit files; Do this with a command of the form:
CLINK T ...
CLINK will attempt to transmit the listed files over COM1, and
will terminate as soon as all files are sent, or the transfer is
aborted. may be one or more file names with or without
drive and path specifiers. Wildcards may be used.
3) Give help; If you type:
or any invalid command, CLINK will display a brief reminder of
what arguments she understands in command mode.
In all cases, CLINK in the command mode will not alter the serial port
other than to set eight data bits, one stop bit, and no parity. Any
previously installed serial drivers will be replaced, and the baud
rate will not be changed.
CLINK comes with her own serial driver built in for the IBM PC family
and true compatibles, but she is capable of using any standard FOSSIL