Category : C Source Code
Archive   : ELM23SRC.ZIP
Filename : TMAC.N

 
Output of file : TMAC.N contained in archive : ELM23SRC.ZIP
.\" @(#)$Id: tmac.n,v 4.1 90/04/28 22:41:47 syd Exp $
.\" The News macro package
.\"
.\" This is the macro package that is used to format news documents. It
.\" was written because many sites do not have one of the -mm or -ms pack-
.\" ages that the documents use. This is NOT compatible with EITHER, but
.\" (I hope) will become the standard for all news documents (man pages
.\" excepted, since everyone seems to have -man.)
.\"
.\" This package was written using only the "NROFF/TROFF Users' Guide",
.\" and therefore if you can run NROFF/TROFF, you can legitimately use
.\" this package. However, because NROFF/TROFF are proprietary programs,
.\" I cannot place this package in the public domain. This should not
.\" matter, because if you legitimately have NROFF/TROFF, you have the
.\" documentation; if not, you can't run off the documentation anyway.
.\"
.\" This package may be circulated freely with the news documentation; it
.\" may not be sold, but is to be distributed with the unformatted news
.\" documents. However, the name of the author and the place at which it
.\" was written (in the author's own time, of course) are not to be
.\" removed from the package regardless of how it is modified or altered.
.\" Further, please do not distribute this package if you make any changes
.\" because I don't want to get bug reports of macros I haven't written;
.\" if you have a goodie you want me to add, send it to me and we'll talk.
.\" (I really do like feedback!) I'd really appreciate your cooperation.
.\"
.\" Author: Matt Bishop
.\" Research Institute for Advanced Computer Science
.\" Mail Stop 230-5
.\" NASA Ames Research Center
.\" Moffett Field, CA 94035
.\"
.\" version 1.0 September 28, 1985 [email protected]
.\" initial version
.\" version 1.1 October 25, 1985 [email protected]
.\" fixed an incredibly obscure footnote bug (that occurred twice in
.\" the news documentation!) which put footnoted words on one page
.\" and the footnote on the next if the word was in the next-to-last
.\" or last line; commented it, and generally cleaned up
.\" Version 1.2 October 27, 1985 [email protected]
.\" Added a few more comments and a check to keep footnotes lined up
.\" with the bottom margin.
.\" Version 1.3 February 12, 1986 [email protected]
.\" Added an error check to catch unmatched ef's and ed's
.\" Version 1.4 December 29, 1986 [email protected]
.\" Changed footnote for ux, pd, and vx macros and added a string
.\" for rg ("Registered Trademark")
.\" Version 1.5 January 2, 1989 [email protected]
.\" Minor modifications for nroff compatibility
.\" Version 1.6 March 15, 1989 [email protected]
.\" ..!bear.dartmouth.edu!bishop
.\" Fixed a bug in footnote handling (again, sigh ...) This one
.\" occurred when the the "fo" trap position was reset just beneath
.\" the current line; the footnote overflow trap would kick in and
.\" never be closed.
.\"
.\"
.\" **********
.\" these preserve and restore various things
.\" they are used to shorten other macros
.de yf \" restore fonts
.ft \\n(f2 \" previous font
.ft \\n(f1 \" current font
..
.de yi \" restore indents
'in \\n(i2u \" previous indent
'in \\n(i1u \" current indent
..
.de ys \" restore point sizes
.ps \\n(s2 \" previous point size
.ps \\n(s1 \" current point size
..
.de yv \" restore vertical spacings
.vs \\n(v2u \" previous vertical spacing
.vs \\n(v1u \" current vertical spacing
..
.de ya \" restore everything
.yf \" restore fonts
.yi \" restore indents
.ys \" restore point sizes
.yv \" restore vertical spacing
.if \\n(f1==0 .ft CW \" unknown font, set to CW
..
.de zf \" preserve fonts
.nr f1 \\n(.f \" current font
.ft \" switch to previous font
.nr f2 \\n(.f \" previous font
.ft \" back to current font
..
.de zi \" preserve indents
.nr i1 \\n(.iu \" current indent
'in \" switch to previous indent
.nr i2 \\n(.iu \" previous indent
'in \" back to current indent
..
.de zs \" preserve point sizes
.nr s1 \\n(.su \" current point size
.ps \" switch to previous point size
.nr s2 \\n(.su \" previous point size
.ps \" back to current point size
..
.de zv \" preserve vertical spacings
.nr v1 \\n(.vu \" current vertical spacing
.vs \" switch to previous vertical spacing
.nr v2 \\n(.vu \" previous vertical spacing
.vs \" back to current vertical spacing
..
.de za \" save everything
.zf \" save fonts
.zi \" save indents
.zs \" save point sizes
.zv \" save vertical spacings
..
.\" **********
.\" these actually print the header and footer titles
.\" they are defined separately from the "hd" and "fo" macros
.\" to make user redefinition easy
.de pt \" print header title
. \" omit header on first page
.if \\n%>1 \{\
' sp |\\$1u \" move to proper position
. ft 1 \" change to default font
. ps \\n(ps \" change to default point size
. vs \\n(vs \" change to default spacing
. tl '\\*(h0'\\*(h1'\\*(h2' \" center title
. vs \" restore current vertical spacing
. ps \" restore current point size
. ft \" restore current font
.\}
..
.de pf \" print footer title
.ft 1 \" change to default font
.ps \\n(ps \" change to default point size
.vs \\n(vs \" change to default spacing
.ie \\n%=1 .tl '\\*(h0'\\*(h1'\\*(h2' \" on first page, print the header here
.el .tl '\\*(f0'\\*(f1'\\*(f2' \" on other pages, print the footer
.vs \" restore current vertical spacing
.ps \" restore current point size
.ft \" restore current font
..
.\" **********
.\" these are the top of page (header) and bottom of page (footer) macros
.\" they don't actually print anything, just call the right macros
.de hd \" header -- do top of page processing
.if t .if \\n(cm .tl '\(rn''' \" drop cut mark if needed
.pt \\n(ttu \" print header
.nr fc 0 1 \" init footnote count
.nr fs \\n(.pu-\\n(bmu-1u \" if any footnotes, start print here
.nr fp 0-\\n(bmu \" reset current footer place
.ch fo -\\n(bmu \" reset footer trap
.if \\n(dn .fz \" put leftover footnotes st bottom
.ya \" restore font, etc.
'sp |\\n(tmu \" move to top of body
.ns \" don't allow any more space
..
.de fo \" footer -- do bottom of page processing
.za \" save font, etc.
.rs \" you want motions here
.nr dn 0 \" clobber diversion size register
.if \\n(fc .fd \" now print the footnotes, if any
'bp \" force out page
..
.\" **********
.\" these are the footnote macros
.\" here's an overview:
.\" Footnotes are processed in environment #1, which is initialized
.\" at the bottom of this package. When "fn" is called, nroff/troff
.\" switches to this environment. The body of the footnote is saved
.\" in the diversion "tf" (for "temporary footnote"), so you will
.\" NEVER spring a trap during the first reading of a footnote. When
.\" "ef" ("end footnote") is called, the diversion is closed. If
.\" this is the first footnote on the page (ie, the number register
.\" "fc" is 1), and the footnote height (plus the height of 1 line)
.\" crosses the bottom margin, you get the footnoted word on one
.\" page and the footnote on the other. In this case we just call
.\" "fo" manually (taking case it cannot be re-invoked on the same
.\" page!) If this situation does not occur, we just adjust the
.\" footer trap's position upwards (we'll get to how far in a min-
.\" ute); if this puts the trap above the current line, we reposi-
.\" tion the trap just beneath the current line to be sure of trig-
.\" triggering it once the current line is forced out.
.\" To reposition the footer trap, we proceed as follows. Because
.\" the trap may be sprung in the middle of a line, it is possible
.\" that the footnote will not fit on the page (regardless of where
.\" on the page the footnoted word occurs -- really!) if we move the
.\" trap up by the size of the footnote diversion "tf". So, we
.\" fudge things a little bit -- for the first footnote on each page
.\" we move the footer trap up 1 extra line ("line" being 1v in env-
.\" ironment #0). Unless the point size and vertical spacing are
.\" increased between the first footnote and the footer trap's being
.\" sprung, this will keep the footnotes on the same page as the
.\" footnoted word. But as there may be now as much as 1v of space
.\" between the footnote and the bottom margin, which looks HIDEOUS,
.\" we use the number register "fs" to mark where the footer trap
.\" would REALLY go, and just space to it when it comes time to put
.\" out the footnotes.
.de fd \" dump footnotes
.nr gs 1v \" get a measure of 1 line in env #0
.ev 1 \" switch to footnote environment
.nr gs +2v \" min of 2 lines of footnotes
. \" if the number register ns > 0,
. \" the last text line may contain a
. \" footnote that is too big to fit;
. \" this checks for such a note and
. \" if so, forces the footnote into
. \" the "fy" diversion that carries
. \" it onto the next text page
.ie (\\n(nsu>0)&(\\n(gsu>=\\n(.tu) 'sp \\n(gsu \" be sure you can get it down
.el .if \\n(fsu>\\n(nlu 'sp \\n(fsu-\\n(nlu \" move to footnote start position
'nf \" don't reprocess footnotes
'in 0 \" don't indent them any more either
.tf \" drop text of footnotes
.rm tf
.if '\\n(.z'fy' .di \" end overflow diversion, if any
.nr fc 0 \" re-init footnote count
.ev \" return to usual environment
..
.de fn \" start footnote
. \" look for nested footnotes -- ILLEGAL
.ie \\n(if>0 .er "footnote within footnote"
.el .da tf \" append footnote to footnote diversion
.nr if +1 \" increment level of footnoting
.nr fc +1 \" one more footnote on this page
.if \\n(fc=1 .nr fp -1v \" The reason for this "fudge factor"
. \" is that there is no way to force
. \" NROFF/TROFF to invoke a macro at
. \" the end of each line. At times,
. \" the trap boundary will not match up
. \" with the bottom of a line, so the
. \" "fo" trap which is set at 2320 may
. \" not be triggered until 2340 -- and
. \" then the footnote won't fit. This
. \" gives some slack so the footnote is
. \" more likely to fit. *sigh*
.ev 1 \" enter footnote environment
.if \\n(fc=1 .fs \" drop separator if first footnote
.br \" flush out any previous line in footnote
.fi \" process footnote in fill mode
..
.de ef \" end footnote
.br \" flush out the line in footnote
.ie \\n(if<=0 .er "end footnote has no corresponding begin footnote"
.el \{\
. nr if -1 \" decrement level of footnoting
. nr fg 2v \" remember this for repositioning fo
. ev \" back to usual environment
. if \\n(if=0 \{\
. di \" end of footnote proper
. nr fp -\\n(dnu \" "fo" will be moved at least up this far
. nr fs -\\n(dnu \" increase size of footnote
. ch fo \\n(fpu \" reposition "fo" trap (first guess)
. \" the first part of the "ie" clause
. \" is taken in the special case
. \" described above
. ie (\\n(fc=1)&((\\n(nlu+1v+\\n(fgu)>=(\\n(.pu-\\n(bmu)) \{\
. nr ns \\n(dnu \" suppress footnote separator
. \" since this footnote contains it
. \" keep "fo" from being invoked twice
. ch fo \\n(.pu+1i
. fo \" force the page out AT ONCE
. nr ns 0 \" re-enable footnote separator
. \}
. \" footnote won't fit completely
. \" invoke the footer trap but
. \" don't worry about the footnote
. \" separator (it's already there)
. el .if (\\n(nlu+1v)>=(\\n(.pu+\\n(fpu) \{\
. \" as before we must reposition the
. \" "fo" trap to prevent "fo" from
. \" being invoked twice
. ch fo \\n(.pu+1i
. fo \" force the page out AT ONCE
. \}
. \}
.\}
..
.de fs \" drop footnote separator
. \" only if not already dropped
.if \\n(ns=0 \l'1i'
.nr ns 0 \" in case footnotes are over 1 page long
..
.de fx \" process footnote overflow
.if \\n(fc .di fy \" stuff them in the right place
..
.de fz \" deposit footnote overflow
.fn \" treat it as a footnote
.nf \" it's already been processed
.in 0 \" and indented
.fy \" "fx" put it here
.ef \" end the footnote
..
.\" **********
.\" the ones after here are user-invoked (like "fn" and "ef" above)
.\" title, author, etc.
.de mt \" main title
\&
.sp |\\n(mtu \" space
.ft 3 \" in bold
.ps \\n(ps+2p \" large point size and
.vs \\n(vs+2p \" vertical spacing
.ce 1000 \" center the title
.nr t2 1 \" space it
..
.de au \" author
.nr t2 0 \" spacing here
.sp 2v \" space
.ft 2 \" in italics
.ps \\n(ps \" usual point size and
.vs \\n(vs \" vertical spacing
.ce 1000 \" center the name(s)
..
.de ai \" author's institution
.if \\n(t2 .sp 2v \" space after a title
.nr t2 0 \" institution
.ft 2 \" in italics
.ps \\n(ps \" usual point size and
.vs \\n(vs \" vertical spacing
.ce 1000 \" center the name(s)
..
.de bt \" begin text macro
.nr t2 0 \" hold it here
.nr it +1 \" mark as called
.ce 0 \" end any centering
.sn 3v \" a little bit of space
..
.\" paragraph
.de si \" start indented section
.nr lo \\n(lm \" remember the current level
.nr lm +1 \" go to the next level
.ie '\\$1'' .nr l\\n(lm \\n(l\\n(lo+5n \" if no arg, indent 5n
.el .nr l\\n(lm \\$1n \" otherwise, indent that much
..
.de ei \" end indent
.nr lm -1 \" down one level
.if \\n(lm<0 .nr lm 0 \" make sure you don't go too far
..
.de pg \" plain old paragraph
.if !\\n(it .bt \" end the title and such
.sn \\n(pdu \" inter-paragraph spacing
.ft 1 \" reset a few things (paranoia)
. \" these ONLY if not in footnote
.ie \\n(if=0 \{\
. ps \\n(ps \" reset point size
. vs \\n(vs \" reset vertical spacing
. ne 1v+\\n(.Vu \" slightly more than 1 line
.\}
.el \{\
. ps \\n(ps-2p \" reset point size
. vs \\n(vs-2p \" reset vertical spacing
.\}
.in \\n(l\\n(lmu \" stop any indenting
.ce 0 \" stop any centering
.if !'\\$1'L' .if !'\\$1'l' .ti +\\n(piu \" indent the sucker
..
.de lp \" labelled paragraph
.pg l \" reset paragraph
.if \\n(.$>1 .nr li \\$2n \" if indent given use it
.in +\\n(liu \" indent for paragraph
.ti -\\n(liu \" force first line NOT to indent
.ta +\\n(liu \" for the label
\&\\$1\t\c
.if \\w'\\$1'u>=(\\n(l\\n(lmu+\\n(liu) .br \" don't overwrite
..
.\" The following two macros (hu & hn) have been modified for ELM usage.
.\" If the macros have text as part of the macro call, the text will be
.\" increased in size by two points. After printing the text, the font
.\" will be returned to normal, otherwise the font will be left bold.
.\"
.\" section
.de hu \" header, unnumbered
. \" format: .hu [text]
.if !\\n(it .bt \" end the title and such
.br \" force out previous line
.b
.ie \\n(hP .ps \\n(hP
.el .ps \\n(ps
.ie \\n(hv .vs \\n(hv
.el .vs \\n(vs
.in \\n(l\\n(lmu \" stop any indenting
.sn \\n(hsu \" inter-section spacing
.ne 3v+\\n(.Vu \" slightly more than 3 lines
.fi \" process the text, too
.if \\n(.$>=1 \{\
.ps +2
\\$1
.\}
.if \\n(.$>=2 \\$2
.if \\n(.$>=3 \\$3
.if \\n(.$>=4 \\$4
.if \\n(.$>=5 \\$5
.if \\n(.$>=6 \\$6
.if \\n(.$>=7 \\$7
.if \\n(.$>=8 \\$8
.if \\n(.$=9 \\$9
.if \\n(.$>=1 \{\
.ps -2
.br
.ft 1
.\}
..
.de hn \" header, numbered
. \" format: .hn [level] [text]
.if !\\n(it .bt \" end the title and such
.br \" force out previous line
.b
.ie \\n(hP .ps \\n(hP
.el .ps \\n(ps
.ie \\n(hv .vs \\n(hv
.el .vs \\n(vs
.in \\n(l\\n(lmu \" stop any indenting
.sn \\n(hsu \" inter-section spacing
.ne 3v+\\n(.Vu \" slightly more than 3 lines
.fi \" process the text, too
.ie !'\\$1'' .nr hn \\$1
.el .nr hn 1
.ie \\n(hn>0 .nr hn -1
.el .nr hn 0
.ie \\n(hn=0 \{\
. nr h0 +1 \" add 1 to main section header
. nr h1 0 \" zap remaining section numbers
. nr h2 0 \" zap remaining section numbers
. nr h3 0 \" zap remaining section numbers
.ie \\n(.$>=2 \{\
.ps +2
\\n(h0.
.ps -2
.\}
.el \\n(h0.
.\}
.el .ie \\n(hn=1 \{\
. nr h1 +1 \" add 1 to the section header
. nr h2 0 \" zap remaining section numbers
. nr h3 0 \" zap remaining section numbers
.ie \\n(.$>=2 \{\
.ps +2
\\n(h0.\\n(h1.
.ps -2
.\}
.el \\n(h0.\\n(h1.
.\}
.el .ie \\n(hn=2 \{\
. nr h2 +1 \" add 1 to the section header
. nr h3 0 \" zap remaining section numbers
.ie \\n(.$>=2 \{\
.ps +2
\\n(h0.\\n(h1.\\n(h2.
.ps -2
.\}
.el \\n(h0.\\n(h1.\\n(h2.
.\}
.el \{\
. nr h3 +1 \" add 1 to the section number
.ie \\n(.$>=2 \{\
.ps +2
\\n(h0.\\n(h1.\\n(h2.\\n(h3.
.ps -2
.\}
.el \\n(h0.\\n(h1.\\n(h2.\\n(h3.
.\}
.if \\n(.$>=2 \{\
.ps +2
\\$2
.\}
.if \\n(.$>=3 \\$3
.if \\n(.$>=4 \\$4
.if \\n(.$>=5 \\$5
.if \\n(.$>=6 \\$6
.if \\n(.$>=7 \\$7
.if \\n(.$>=8 \\$8
.if \\n(.$>=9 \\$9
.if \\n(.$>=2 \{\
.br
.ft 1
.ps -2
.\}
..
.\" displays (no floats, thank God!)
.de sd \" start display
. \" look for nested displays -- ILLEGAL
.ie \\n(id>0 .er "display within display"
.el \{\
. ie '\\$1'c' .nr sf 1 \" center the sucker
. el .nr sf 0 \" don't center it
.\}
.sn \\n(pdu \" a little bit of space
.ev 2 \" switch to display environment
.nf \" what you type is what you get
.if \\n(id=0 .di dd \" start saving text
.rs \" don't eat leading space
.nr id +1 \" increment level of display
..
.de ed \" end display
.br \" flush line
.ie \\n(id<=0 .er "end display has no corresponding begin display"
.el \{\
. nr id -1 \" decrement level of display
. if \\n(id=0 \{\
. di \" end diversion
. fi \" resume filling
. in -\\n(piu \" dedent
. ev \" pop environment
. ne \\n(dnu \" be sure you have room
. nf \" don't reprocess display
. rs \" don't eat leading space
. zi \" save indents
. ie \\n(sf .in (\\n(llu-\\n(dlu)/2u \" center on the line length
. el .in +\\n(piu \" indent the sucker
. dd \" drop display
. yi \" restore indents
. \}
.\}
.fi \" resume filling
.sn \\n(pdu \" a little bit of space
..
.\" **********
.\" fonts -- if argument(s), apply only to first
.de b \" bold (font 3)
.ie \\n(.$>0 \\&\\$3\\f3\\$1\\fP\\$2
.el .ft 3
..
.de i \" italics (font 2)
.ie \\n(.$>0 \\&\\$3\\f2\\$1\\fP\\$2
.el .ft 2
..
.de r \" roman (font 1)
.ft 1 \" just restore it
..
.de bi \" bold italics (embolden font 2)
\\&\\$3\c
\\kb\\f2\\$1\\fP\\h'|\\nbu+2u'\\f2\\$1\\fP\\$2
..
.\" **********
.\" point sizes -- if argument(s), apply only to first
.de sm \" reduce point size by 2
.ie \\n(.$>0 \\&\\$3\\s-2\\$1\\s0\\$2
.el .ps -2
..
.de is \" increase point size by 2
.ie \\n(.$>0 \\&\\$3\\s+2\\$1\\s0\\$2
.el .ps +2
..
.de nl \" return to normal size
.ps \\n(ps \" just reset the point size
..
.\" **********
.\" handy force space/inhibit more space macros
.de sn \" space, then turn on nospace mode
.sp \\$1 \" space
.ns \" ignore any more space requests
..
.de sr \" force out space
.rs \" turn on spacing mode
.sp \\$1 \" space
..
.\" **********
.\" end of text and error macros
.de et \" end of text macro
. \" this: (1) flushes rest of line
. \" (2) trips the footer, taking
. \" care of footnotes
.sp \\n(.pu
. \" check for open displays or footnotes
.if \\n(id>0 .er "unfinished display"
.if \\n(if>0 .er "unfinished footnote"
. \" this one means an -mn bug (*sigh*)
.if !'\\n(.z'' .er "diversion \\n(.z not closed"
..
.de er \" print error message
. \" flag it as an error
.ds ws "** ERROR **
. \" if you have it, give the file name
.if !'\\*(.f'' .as ws " file \\*(.f,
. \" put out the line number
.as ws " line \\n(.c
. \" and finally the error message
.tm \\*(ws: \\$1
..
.\" **********
.\" macros in this section are VERY specific to the news documentation
.de pa \" protocol appellation (darn names!)
\\&\\$3\\f2\\$1\\fP\\$2
..
.de ng \" news group name
\\&\\$3\\f3\\$1\\fP\\$2
..
.de cn \" computer name
\\&\\$3\\f2\\$1\\fP\\$2
..
.de hf \" header field
\\&\\$3\\*(lq\\$1\\*(rq\\$2
..
.de cf \" contents of field
\\&\\$3\\*(lq\\$1\\*(rq\\$2
..
.de qc \" quote control char (command)
\\&\\$3\\f3<\\s-2\\$1\\s0>\\fP\\$2
..
.de qp \" quote printing char (command)
\\&\\$3\\f3\\$1\\fP\\$2
..
.de op \" option
\\&\\$3\\f3\\$1\\fP\\$2
..
.\" **********
.\" trademarked names
.de pd \" print "PDP-11"
.ie \\n(p1 \\&\\$2\\s-1PDP\\s0-11\\$1
.el \{\
. nr p1 +1 \" mark footnote as dropped
\\&\\$2\\s-1PDP\\s0-11\\*(rg\\$1
. fn \" put out the footnote
\\&\\*(rgPDP-11 is a registered trademark of Digital Equipment Corporation.
. ef \" short and sweet ...
.\}
..
.de ux \" print "UNIX"
.ie \\n(ux \\&\\$2\\s-1UNIX\\s0\\$1
.el \{\
. nr ux +1 \" mark footnote as dropped
\\&\\$2\\s-1UNIX\\s0\\*(rg\\$1
. fn \" put out the footnote
\\&\\*(rgUNIX is a registered trademark of AT&T.
. ef \" short and sweet ...
.\}
..
.de vx \" print "VAX"
.ie \\n(vx \\&\\$2\\s-1VAX\\s0\\$1
.el \{\
. nr vx +1 \" mark footnote as dropped
\\&\\$2\\s-1VAX\\s0\\*(rg\\$1
. fn \" put out the footnote
\\&\\*(rgVAX is a trademark of Digital Equipment Corporation.
. ef \" short and sweet ...
.\}
..
.\" **********
.\" set up string and number registers
. \" set up for the date
.if \n(mo=1 .ds mo January
.if \n(mo=2 .ds mo February
.if \n(mo=3 .ds mo March
.if \n(mo=4 .ds mo April
.if \n(mo=5 .ds mo May
.if \n(mo=6 .ds mo June
.if \n(mo=7 .ds mo July
.if \n(mo=8 .ds mo August
.if \n(mo=9 .ds mo September
.if \n(mo=10 .ds mo October
.if \n(mo=11 .ds mo November
.if \n(mo=12 .ds mo December
.ds dy "\*(mo \n(dy, 19\n(yr
.if \n(dw=1 .ds dw Sunday
.if \n(dw=2 .ds dw Monday
.if \n(dw=3 .ds dw Tuesday
.if \n(dw=4 .ds dw Wednesday
.if \n(dw=5 .ds dw Thursday
.if \n(dw=6 .ds dw Friday
.if \n(dw=7 .ds dw Saturday
. \" NROFF dependencies
.if n \{\
. \" string registers
. ds rg (R)
. ds lq ""
. ds rq ""
. ds f1 "\*(dy
. \" number registers
. nr hs 1v \" space before section header
. nr pd 1v \" inter-paragraph spacing
. nr bm 1.0i \" height of bottom margin
.\}
. \" NROFF dependencies
.if t \{\
. \" string registers
. ds rg \\u\\s-2\\(rg\\s0\\d
. ds lq ``
. ds rq ''
. \" number registers
. nr hs 1v \" space before section header
. nr pd 0.3v \" inter-paragraph spacing
. nr bm 1.0i+1v \" height of bottom margin (wacky laser)
.\}
. \" these are the same for [NT]ROFF
.ds dg \(dg
.ds vr "News Version B2.11
.ds pv "News macros 1.5
.ds h1 - % -
.nr bt 0.5i+1v \" bottom of page to footer
.nr cm 0 \" no cut marks
.nr fc 0 1 \" init footnote count
.nr fl 5.5i \" footnote line length
.nr fp 0-\n(bmu \" fo macro trap location
.nr h0 0 \" init section header level 0
.nr h1 0 \" init section header level 1
.nr h2 0 \" init section header level 2
.nr h3 0 \" init section header level 3
.nr id 0 \" 1 in display
.nr if 0 \" 1 in keep
.nr it 0 \" 1 when beyond title, etc.
.nr li 5n \" indent for labelled paragraph
.nr ll 6.5i \" line length
.nr lm 0 \" left margin
.nr l0 0 \" first indent level
.nr mt 1.5i+1v \" title goes down this far
.nr pi 5n \" regular paragraph indent
.nr po 1.0i \" page offset
.nr ps 10 \" point size
.nr tm 1.0i \" height of top margin
.nr tt 0.5i-0.5v \" top of page to header
.nr p1 0 \" no PDP-TM message yet
.nr ux 0 \" no UNIX-TM message yet
.nr vx 0 \" no VAX-TM message yet
.nr vs 12 \" vertical spacing
.\" set things up
.\" DSINC changes for XROFF
.nr f1 1
.nr f2 1
.nr s1 10
.nr s2 10
.nr v1 12
.nr v2 12
.ps 10
.vs 12
.\" DSINC end changes for XROFF
.po \n(pou \" set page offset
.ps \n(ps \" set previous, current
.ps \n(ps \" point sizes
.vs \n(vs \" set previous, current
.vs \n(vs \" vertical spacings
.ll \n(llu \" set line length
.lt \n(llu \" set title line length
.ev 1 \" *** footnote environment
.ps \n(ps-2p \" set previous, current
.ps \n(ps-2p \" point sizes
.vs \n(vs-2p \" set previous, current
.vs \n(vs-2p \" vertical spacings
.ll \n(flu \" set line length
.lt \n(flu \" set title line length
.ev \" *** pop environment
.ev 2 \" *** footnote environment
.ps \n(ps \" set previous, current
.ps \n(ps \" point sizes
.vs \n(vs \" set previous, current
.vs \n(vs \" vertical spacings
.ll \n(llu \" set line length
.lt \n(llu \" set title line length
.ev \" *** pop environment
.\" now set internal registers (for the first header section)
.nr f1 \n(.f \" saved font #1
.nr f2 \n(.f \" saved font #2
.nr s1 \n(.s \" saved point size #1
.nr s2 \n(.s \" saved point size #2
.nr v1 \n(.v \" saved vertical spacing #1
.nr v2 \n(.v \" saved vertical spacing #2
.\" install traps
.wh 0i hd \" position header trap
.wh -\n(bmu fo \" position footer trap
.wh \n(.pu+1i fx \" put footnote overflow trap here
.ch fx -\n(bmu \" move it over fo
.wh -\n(btu pf \" print the bottom margin here
.em et \" at end of file, call et
.\" couple of miscellaneous requests
.bd S 3 3 \" embolden special font chars if B
.hy 2 \" don't hyphenate last lines


  3 Responses to “Category : C Source Code
Archive   : ELM23SRC.ZIP
Filename : TMAC.N

  1. Very nice! Thank you for this wonderful archive. I wonder why I found it only now. Long live the BBS file archives!

  2. This is so awesome! 😀 I’d be cool if you could download an entire archive of this at once, though.

  3. But one thing that puzzles me is the “mtswslnkmcjklsdlsbdmMICROSOFT” string. There is an article about it here. It is definitely worth a read: http://www.os2museum.com/wp/mtswslnk/